Must Have Car Accessories – Ventshades and Rain Guards

[ad_1]

Ventshades are the perfect car accessory for you in case you like to drive aided by the windows lowered. By installing a set of attractive vent visors, you can actually happily drive along with the windows lowered no matter what the local weather is like outdoors. Ventshades conveniently shield the window gap from blowing wind, rainwater, sleet and snow and are the perfect accessory for anybody who prefers to appreciate fresh air whilst driving a vehicle. People who smoke cigarettes may specially experience some benefits from fitting this car accessory as they enable smoke to pass out of the vehicle or truck and for exterior air to ventilate the automobile’s interior whilst not causing disruptive gusts of air.

Go with Vent Visors to add Style

Notwithstanding their functional advantages, vent visors are also a stylish accessory to any car, and regardless of whether finished in black, smoked, or chrome they truly help to improve the visual appearance of an automobile without overshadowing the main design.

Added benefits of Ventshades

Just picture for a moment a classic scenario; it’s a splendid day outside, the sun is shining, and you are driving along with your windows down taking pleasure in the fresh air. Then, with out much forewarning, the heavens swiftly begins to become cloudy and rain drops begin falling. You last it out for a few minutes due to the fact it is only gentle rain, but before long you might be required to close the windows to avoid you and your car’s interior getting drenched as the precipitation gets harder. No more fresh air! Unless of course – you’ve got rain guards / wind deflectors, as they’re occasionally known as, fitted to your vehicle.

These inventive products are without any doubt amongst the most convenient yet worthwhile of automobile accessory. By utilizing a ventshade on every window you’re able to have the window lowered to some extent even if it truly is raining heavily. Think about another issue of driving during rain with the windows shut – that’s right, misting and fog blocking your vision. Making use of vent visors and leaving the car windows open just a little helps to stop mist and fog forming on your car windows, so it could even be contended they can help to enhance safety too.

Selecting Ventshades

As they become more and more common and increased numbers of folks start to realize the advantages of vent visors, the variety of various styles and designs available to acquire on-line is escalating. Several people decide to opt for custom made visors that are designed specifically for their own specific make and model of vehicle. For example, it truly is achievable to invest in particular vent visors for trucks, Hyundai ventshades, Ford ventshades, Toyota ventshades and so on. Whenever you are searching for the prefect visors to suit your automobile or truck, be aware that quite a few models are accessible to obtain in either a set of four to cover all car windows, or on the other hand in a set of two just to cover the front driver and passenger windows. Should you frequently have rear passengers, or even when you just like to drive with all the rear windows lowered, then you may possibly find a set of four is the best bet.

Installation of Ventshade

Certainly one of the greatest things about ventshade is that they are so simple to attach. In fact, virtually all sorts and designs do not require any drilling or complex fixings. Normally, the guards are merely clipped into position or fastened using sticky foam tape which is usually provided with the visors. Effortless!

[ad_2]

Source by William P Taylor

Make Small Fortune In The Fishing Industry

[ad_1]

Make Small Fortune In Fishing Industry…

….now there is a headline you don’t see very often. In fact, I have never seen it.

Unless you start out with a large fortune and slowly pitter it away while in pursuit of our friends who live beneath the waves, most people don’t enter the exciting world of the fishing industry to seek fame and fortune. There are rarely any recruiters from Salmon canneries knocking on your door as you bask in the glory of graduation from college, nor do you pick up a copy of Entrepeneur Magazine and find” fisherman” as a hot start-up franchise. Guys wearing lots of “bling” and chest waders rarely come sloshing into your business and hand you a business card and brochure claiming that: “for a $10,000 investment I can help you triple your income in thirty days…GUARANTEED!!”

In fact, I even googled “Make Money Fishing” and came away with 313 responses and the disheartening notion that if you choose fishing as a way of life–you are pretty much destined for a life of relaxed mediocrity. There of course are some exceptions, like tournament bass fisherman, or guys selling fishing adventures to Mars–but for the most part –if you have some startling epiphany that “I want to make my fortune in fishing”- you are barking up the wrong riffle.

Some other samples from the make money fishing offerings:

1. Russ Roy– Offers up a slightly “tongue in cheek” article, stating that we fisherman can earn extra cash slathering stinky fish attractants and fish “sputem” on our jeans and then resell them on perhaps eBay as “designer fisher wear”. Complete with fish hook holes. I only say slightly “tongue in cheek”–because they probably would sell — especially in some posh Beverly Hills boutique on Rodeo drive.

“Oh dahling, those salmon roe encrusted Jordaches make your tush look devine!!”

Heck, throw in a “roostertail” 1/4 ounce zipper and I might buy a pair myself.

2. A New England commercial fisherman is selling his fishing operation–He is “grossing” about $80K per year and claims a “cash flow” of $53k. Asking price $105k.

The “hook” here is the benefit of leaving the rat race for the “open seas”.

I have to ask myself,” does this mean he wants to re-enter the rat race??” Health issues force sale?? Wear funky woolen sweaters!

NO THANKS!

Oh and by the way– it is a one man operation–so have fun running around that boat and giving orders to yourself, or you can hire someone and pretty much watch your $53k disappear.

No fortune there.

3. Make your own fishing lures– This might give you some self satisfaction, or relieve some tension–which in itself might be a nice benefit for the rest of society- and I suppose if you can get $3.00 a lure you can actually triple your income as a current fly tier…However, I doubt you are going to make a fortune, unless you can break into a already saturated market of fishing lure producers or you live to be 116 and can sell them on eBay as “antiques”.

I really couldn’t find any bonafide “get rich in fishing” schemes, except for the tournament fisherman offerings, which pretty much isn’t considered fishing at that point.

Not even an MLM scheme– “You see, you buy 12 fish and send them to each of the Kingfishers in your UPLINE– and then you move up from carp level!!” –“When you move to the top of the “pyramid anchor”and become a “Marlin” you will then receive 64,000 FISH in your mailbox!”

Are you in?

So I guess we fishermen will have to retreat to the “zen-minimalist” philosophy of : less is more, if we want to consider ourselves “wealthy” or “rich”.

At least by fishing standards, we can consider ourselves rich in outdoor experiences, or having a wealth of fishing knowledge. Not to mention, that the Toyota Chinook camper is paid for!!

According to my good friend”Webster” fortune is defined as :prosperity attained partly through luck… AND who knows more about luck than a fisherman!!!

So, keep trying to sell those Rolex imatations, cheap pharmaceuticals, and”secrets” to success on ebay.

The competition is a lot less in:” the road to fishing riches” market.

Which can only lead to a lot of “downtime”, which can certainly be filled with….. FISHING!

Besides, I have never heard it said that: “the time spent selling cialis on the internet is not deducted from one’s life”–have you?

[ad_2]

Source by A.J. Klott

16 Most Inspiring Famous Failures

[ad_1]

To succeed in business or life, I came to realize that we must continually take remedial actions. Putting myself on the line day after day can be extremely draining, especially when things do not work out as I desired. Hence, each time I face a disappointing event or undesirable outcome, I NEVER FORGET these famous failures:

1. Bill Gates, founder and chairman of Microsoft, has literally changed the work culture of the world in the 21st century, by simplifying the way computer is being used. He happens to be the world’s richest man for the last one decade. However, in the 70’s before starting out, he was a Harvard University dropout. The most ironic part is that, he started a software company (that was soon to become Microsoft) by purchasing the software technology from “someone” for only $US50 back then.

2. Abraham Lincoln, received no more than 5 years of formal education throughout his lifetime. When he grew up, he joined politics and had 12 major failures before he was elected the 16th President of the United States of America.

3. Isaac Newton was the greatest English mathematician of his generation. His work on optics and gravitation made him one of the greatest scientists the world has even known. Many thought that Isaac was born a genius, but he wasn’t! When he was young, he did very poorly in grade school, so poor that his teachers became clueless in improving his grades.

4. Ludwig van Beethoven, a German composer of classical music, is widely regarded as one of history’s supreme composers. His reputation has inspired – and in many cases intimidated – composers, musicians, and audiences who were to come after him. Before the start of his career, Beethoven’s music teacher once said of him “as a composer, he is hopeless”. And during his career, he lost his hearing yet he managed to produce great music – a deaf man composing music, ironic isn’t!

5. Thomas Edison who developed many devices which greatly influenced life in the 20th century. Edison is considered one of the most prolific inventors in history, holding 1,093 U.S patents to his name. When he was a boy his teacher told him he was too stupid to learn anything. When he set out on his own, he tried more than 9,000 experiments before he created the first successful light bulb.

6. The Woolworth Company was a retail company that was one of the original five-and-ten-cent stores. The first Woolworth’s store was founded in 1878 by Frank Winfield Woolworth and soon grew to become one of the largest retail chains in the world in the 20th century. Before starting his own business, Woolworth got a job in a dry goods store when he was 21. But his employer would not let him serve any customer because he concluded that Frank “didn’t have enough common sense to serve the customers”.

7. By acclamation, Michael Jordon is the greatest basketball player of all time. A phenomenal athlete with a unique combination of grace, speed, power, artistry, improvisational ability and an unquenchable competitive desire. Jordan single-handedly redefined the NBA superstar. Before joining NBA, Jordan was just an ordinary person, so ordinary that was cut from high school basketball team because of his “lack of skill”.

8. Walter Disney was American film producer, director, screenwriter, voice actor, and animator. One of the most well-known motion picture producers in the world, Disney founded a production company. The corporation, now known as The Walt Disney company, makes average revenue of US $30 billion annually. Disney started his own business from his home garage and his very first cartoon production went bankrupt. During his first press conference, a newspaper editor ridiculed Walt Disney because he had no good ideas in film production.

9. Winston Churchill failed the 6th grade. However, that never stopped him to work harder! He strived and eventually became the Prime Minister of the United Kingdom during the Second World War. Churchill is generally regarded as one of the most important leaders in Britain and world history. In a poll conducted by the BBC in 2002 to identify the “100 Greatest Britons”, participants voted Churchill as the most important of all.

10. Steven Spielberg is an American film director. He has won 3 Academy Awards an ranks among the most successful filmmakers in history. Most of all, Steven was recognized as the financially most successful motion picture director of all time. During his childhood, Spielberg dropped out of junior high school. He was persuaded to come back and was placed in a learning-disabled class. He only lasted a month and then dropped out of school forever.

11. Albert Einstein was a theoretical physicist widely regarded as the most important scientist of the 20th century. He was awarded the 1921 Nobel Prize for Physics for his explanation of the photoelectric effect in 1905 and “for his services to Theoretical Physics”. However, when Einstein was young, his parents thought he was mentally retarded. His grades in school were so poor that a teacher asked him to quit, saying, “Einstein, you will never amount to anything!”

12. In 1947, one year into her contract, Marilyn Monroe was dropped by 20th Century-Fox because her producer thought she was unattractive and cannot act. That didn’t deter her at all! She kept on going and eventually she was recognized by the public as the 20th century’s most famous movie star, sex symbol and pop icon.

13. John Grisham‘s first novel was rejected by sixteen agents and twelve publishing houses. He went on writing and writing until he became best known as a novelist and author for his works of modern legal drama. The media has coined him as one of the best novel authors even alive in the 21st century.

14. Henry Ford‘s first two automobile companies failed. That did not stop him from incorporating Ford Motor Company and being the first to apply assembly line manufacturing to the production of affordable automobiles in the world. He not only revolutionized industrial production in the United States and Europe, but also had such influence over the 20th century economy and society. His combination of mass production, high wages and low prices to consumers has initiated a management school known as “Fordism”. He became one of the three most famous and richest men in the world during his time.

15. Soichiro Honda was turned down by Toyota Motor Corporation during a job interview as “engineer” after World War Two. He continued to be jobless until his neighbors starting buying his “home-made scooters”. Subsequently, he set out on his own to start his own company. Honda. Today, the Company has grown to become the world’s largest motorcycle manufacturer and one of the most profitable automakers – beating giant automaker such as GM and Chrysler. With a global network of 437 subsidiaries, Honda develops, manufactures, and markets a wide variety of products ranging from small general-purpose engines and scooters to specialty sports cars.

16. Akio Morita, founder of giant electric household products, Sony Corporation, first product was an electric rice cooker, only sold 100 cookers (because it burned rice rather than cooking). Today, Sony is generating US$66 billion in revenue and ranked as the world’s 6th largest electronic and electrical company.

[ad_2]

Source by Kenneth Foo

The Nissan & IBM Outsourcing Agreement

[ad_1]

Introduction

In the year, prior to the turn of the millennium, Nissan was a company in a serious financial crisis. Debt had approached $22 billion by 1999. The company had been too complacent, and had taken its prior success, for granted [2].

Did Nissan’s decision to outsource their IT Infrastructure to IBM in 1999 make good sense? Nissan was a very troubled auto-manufacturer in the late 1990’s. Senior executives from the company were known for their conservative outlook on business, and their ‘old boy’s network,’ mentality. Profits were dropping dramatically, eventually forcing the company into the $22 Billion debt that it then faced. There were no signs indicating a change in the market that would encourage profit growth. The vehicle sales needed invigoration.

Mergers were the flavor of the day in the automotive industry during the late 1990’s. Nissan executives approached Daimler Chrysler and Ford to discuss a possible merger, but there was no interest from either of the companies [2]. There was only one alternative left, which was to reinvent themselves and reduce unnecessary overheads. This was the defining point that led to the business process outsourcing decision.

This paper seeks to answer the question “Does the cost of implementing an in-house solution outweigh the benefits or does Business Process Outsourcing (BPO) make more sense?” We reviewed the example of the automotive manufacturer, Nissan, when they decided to outsource their entire Information Technology department to IBM in late 1999, to answer our question.

Nissan – A brief history and the events leading up to the BPO decision

I. The Boom years

Nissan was established in Japan in 1933 as a heavy industry manufacturer. After the Second World War they turned their attention to automotive vehicles. In the 1950’s, they finally had an impact on the global market with the introduction of the Datsun branded sedans and small pickup trucks. The company eventually opened full-time operations in the USA in September 1960 [6].

The company experienced dramatic growth with the introduction of the ‘Z’ series sports sedans in the early 1970’s, with the 240Z becoming the fastest selling sports car of all time. This success led Nissan to the top of the U.S. vehicle importers market by 1975. Vehicle sales in the USA topped over 250,000 units per annum by 1970 [6]. The company was young, its leaders dynamic and the future looked very bright. They were competing for the U.S. market with the likes of Ford, Chrysler, and General Motors, showing improved quality and production efficiencies over their competitors.

The company was growing at a phenomenal rate, opening new manufacturing plants around the world on a regular basis such as Australia (1976), Spain (1980) and the United Kingdom (1984) [6]. There was no respite to the pace of growth and new business generation coming from the company.

In 1983, the company began the worldwide marketing of vehicles under the Nissan name which was felt to have a stronger quality image and started the six year transition from Datsun to Nissan on vehicles, dealerships, facilities and marketing materials. Sales continued to grow, eventually reaching 830,767 in 1985 [6]. The decade closed out with resounding success for Nissan with their domination of the North American market.

In 1993, the mid-line Stanza sedan was replaced with an all-new Altima and non-competitive Japanese-designed minivan was replaced with a new U.S. created Quest, which was the first minivan with car-like handling. Sales came roaring back in 1994 to near-peak levels of 774,405 [6].

In 1996, sales began to slip once again, fueled by a change in American vehicle tastes. Trucks and SUVs gained market share at the expense of sedans and sports cars [2]. Nissan’s position as a manufacturing driven company, which helped them in the ’80’s and early ’90’s, then had new problems with the dollar/yen balance which began to hurt their competitiveness against market driven companies.

Unlike their competitors, Toyota and Honda, which were focused on key volume segments, Nissan did not dominate any individual segment and competed in identical segments against Toyota and Honda.

Unfortunately for Nissan in the 1990s, the Japanese “bubble economy” burst, a downturn in Europe coincided, so there was more pressure in the U.S. to perform. Unfortunately U.S. customers didn’t have a genuine brand reason to shop Nissan except for the ‘best price’ deal.

Former Nissan president, Mr. Nakamura, announced a “Back-to-Basics” plan. The key elements of the plan were to reduce inventories, eliminate unrealistic sales targets, and increase dealer profitability. Unfortunately for Nakamura and Nissan, the plan did not work [2].

II. Trouble looms for the auto-manufacturer in 1990’s

In the early 1990’s, trouble began to brew in the organization. The once revered executives at Nissan were now viewed as arrogant members of the old-boys club and were ignorant to the changing needs of their customers and the overall automotive market, in general.

As the company progressed deeper into debt, it met with more challenges. Nissan’s business partners and suppliers were charging a premium for their goods and services. Nissan was obliged to meet its financial commitments and by so doing placed itself further into debt. Finally, the company was in debt to the tune of $22 billion. Even the company’s financers were tightening the noose around them. Nissan felt the situation was hopeless.

III. Steps taken to address issues

Nissan executives were looking for a way out, a way to rescue the company from entering into bankruptcy. The first approach was to find a partner. Both the newly established DaimlerChrysler and the Ford Motor company were approached, but both organizations rejected the idea of a merger [2]. Finally, Renault, the French automotive company recovering from a similar predicament, decided to enter into negotiations with the flailing Japanese company. A senior executive at Renault, Carlos Ghosn, was a huge supporter of the merger idea.

After much negotiation, the Japanese Ministry of Economy, Trade and Industry agreed to allow Renault to purchase a substantial stake in Nissan. The Nissan-Renault alliance was born and Ghosn was appointed Chief Operating Officer.

Nissans Executive decisions and major events

I. Creating a global alliance vision:

The following is excerpted from the Nissan/Renault alliance vision:

“The Renault-Nissan Alliance is a unique group of two global companies linked by cross-shareholding. They are united for performance though a coherent strategy, common goals, and principles, results-driven synergies, shared best practices. They respect and reinforce their respective identities and brands.”[2]

The Alliance set itself three objectives, with the goal of being amongst the best three automotive groups in the following areas:

1. Quality.

Achieve customer recognition as being a quality and value added product.

2. Technology.

Lead in key technology development and implementation with a focus on excellence in specific areas of the automotive business.

3. Operating Profit.

Consistently generate a high operating profit margin and vigorously pursue growth.

II. Appointing a new leader

Ghosn, given his enthusiasm for the merger, his demonstrated tenacity, and his experience of the automotive industry, was a natural choice for a senior position at Nissan. His initial appointment as Chief Operating Officer (COO) was just a temporary assignment. In 2000, he was named President and in 2001, he was appointed Chief Executive Officer (CEO).

As CEO, Ghosn was very aware that the ‘buck’ stopped with him. He was the final decision maker. Some important and very serious decisions were made to save the ailing company. Ghosn had to use all of his valuable experience gained from rescuing other organizations, such as Michelin and Renault, to save Nissan.

III. Decision making to save a troubled auto-manufacturer

With Ghosn’s arrival in Japan in the spring of 1999, he immediately set about researching Nissan’s root problems. The newly appointed COO had a management philosophy that stated “you must always start with a clean sheet of paper because the worst thing you can have is prefabricated solutions… you have to start with a zero base of thinking, cleaning everything out of your mind.”[2]

For the first few months, Ghosn flew around Japan, meeting and greeting employees at all levels, absorbing information and formulating a plan. He used this information to plot a picture of Nissan from a global perspective, identifying issues, and problems that had created the dispersed, unprofitable organization.

One of the many issues Ghosn identified was the lack of communication around the organization. Seniors managers around the world were aware of some of the issues that caused the downturn of fortune in the company. They even had solutions to them, but had lacked the necessary authority to implement or communicate the solutions back to Corporate Headquarters.

Finally, the major issues were whittled down to five key issues: [2]

• Lack of clear profit orientation. Nissan was not focused on driving profit, but were rather focused on market share and ended up having to buy their market share at the expense of the declining profits.

• Insufficiently focused on customers and too much focus on competitors. The company was too concerned about the competition introducing a new line which would have dug into the Nissan market share. For example when Volkswagen introduced their new Jetta sedan Nissan saw a significant decline in their Maxima sales.

• Lacked cross-functional, cross-border, and intra-hierarchical lines of work in the company. Nissan seemed to operate as separate islands scattered throughout the globe. There was no centralized purchasing function or in fact any of the other major business activities. The organization was not making maximum use of its global presence or buying power.

• Lack of sense of urgency. The executives in Nissan were complacent in their activities. Things had gone so well for the company in the preceding 60 years that they felt that there was no reason to embrace change.

• No shared vision or common long-term plan. Senior management within Nissan did not have a joint plan for the different brands within the company. Each division did their own thing with little or no thought for the greater good of the company. An example was the Z series that had achieved phenomenal success throughout the 1970’s and ’80’s but was suddenly dropped from production when sales dropped. The obvious thing to have been done was to test the market with a modernized design. Instead Nissan chose to ignore the market and drop the brand.

To address the issues, Ghosn announced the Nissan Revival Plan on October 18, 1999. This seven-point plan was aimed at reducing costs and debt as well as creating and launching new automotive brands to raise sales and market awareness. The goals announced in the plan were far-reaching and encompassed: [2]

• The reduction of operating costs, net debt, global head count, and vehicle assembly plants and manufacturing platforms (the latter in Japan).

• The generation of new product investment through the launch of twenty-two new models.

The cost-cutting plan called for centralization of purchasing, procurement, human resources and information technology. By centralizing these essential functions, the plan aimed to assist the company in achieving its aggressive cost reductions.

Expenditure, particularly in the information technology function, was perceived as being out of control. Ghosn’s message to senior level executives was clear, “cut costs in every possible area.” If that meant outsourcing non-core activities because somebody else could do it cheaper, then that had to be fully investigated and determined. The management was ruthless in their execution of the plan [2].

Nissan looks at Business Process Outsourcing as a means

I. Will outsourcing non-core activities save money?

There are well-documented records of company’s saving money and others of outsourcing horror stories. Success really depended on the situation and the provider.

Most experts agreed, though, that you needed to use BPO in strategic decisions, for example refocused efforts on core competencies and not merely for cost cutting activities [1]. Stephen Withers of ZDNet said in his on-line article that you should only “use BPO for strategic purposes, not to take advantage of a (possibly transient) cost saving.” Withers then asked the reader, “Does outsourcing the IT Infrastructure make sense?” To answer that question corporate Chief Information Officer’s (CIO’s) would need to have completed extensive research and have done a thorough analysis of their business processes.

This is exactly what Nissan’s CIO did, or rather what Ghosn told him to do. The company had invested over 80 billion yen (over $US760million) in 1998 on IT services, but their processes were still not providing the management with the infrastructure that would assist in building their competitive edge [5]. The final decision was made to approach various outsourcing service providers for the much needed help.

II. Does outsourcing the IT infrastructure make sense?

If Information Technology (IT) truly was a commodity, like gasoline or electricity, then companies only competed on price, with very small profit margins. In that event, the decision to turn over IT to an outsourcer was as simple as it was a century ago to turn to motor vehicles instead of using the horse and cart. However, while personal computers and the networks they run on may be standardized, the services provided by IT outsourcers vary in many ways. Services such as data analysis, application development, and IT decision-making allowed companies more competitiveness in the market therefore, those elements of IT are far from being viewed as commodities [8].

With regards the decision to outsource, many factors were considered in Nissan’s case. Ann Moynihan in her article in the Albany Business review states “Outsourcing can help you: [3]

• Reduce and control operating costs.

• Free staff to focus on core business.

• Gain access to specialized skills and technologies.

• Introduce positive change.

• Gain control over a difficult-to-manage function resulting from uneven workloads, insufficient or unskilled resources.”

With Nissan, in 1999, this was exactly what they were looking for. Refocused staff efforts, introduction of positive change and control gained in all critical areas led to the outsourcing decision.

The choice of IBM as Nissan’s outsourcing partner was a strategic one. In the late 1990’s there were not many outsourcing companies that had the breadth or the global reach that IBM had. Competitors such as EDS and CSC were not considered because they were only outsourcers and could not offer the hardware and software technology that Nissan required to update their infrastructure [5]. If either one of those competitors were selected over IBM as a partner Nissan would still have faced the same infrastructure issues. IBM was the only logical partner.

Did the relationship work between Nissan & IBM?

I. A further look at the relationship between IBM and Nissan

In a joint IBM and Nissan press release published in Tokyo on June 19, 2000, the two companies announced that they were “Extending their global partnership for information system (IS) operations which Nissan Motor Co., Ltd. and IBM agreed in October 1999, Nissan and IBM today jointly announced that Nissan will outsource its IS operations in Japan, to IBM Japan.

The service includes Nissan’s regular maintenance and operational activities as well as part of its application development, but excludes the planning and design of new systems. The two companies will start operations from October 1. [7]

In North America, Nissan has outsourced these same operations to IBM Corp. since October 1999. This latest agreement in Japan is expected to further accelerate the standardization, integration and centralization of Nissan’s IS on a global level.”

Ghosn further noted, “The Nissan Revival Plan cannot be accomplished without effective information systems. Following upon the recent agreement with Japan Telecom, this latest partnership with IBM puts in place the global infrastructure which is key to support Nissan’s long term profitable growth.” [4]

II. Hypothetical view of the Return-on-Investment model used

Before they could calculate their Return on Investment (ROI), Nissan first had to look at the Total Cost of Ownership model proposed by IBM. Total Cost of Ownership (TCO) is a type of calculation designed to help consumers and enterprise managers assess both direct and indirect costs and benefits related to the purchase of any IT component. The intention was to arrive at a final figure that will reflect the effective cost of purchase, overall [8].

The TCO model used, had to calculate the costs that were required, beyond the fees of outsourcing. The organization had to evaluate specific criteria’s that could have added expense to the outsourcing project. They also had to calculate the ongoing expenses throughout the lifetime of the contract [8].

Then, after calculating the payback period, Nissan were in a position to calculate their ROI. Once the numbers were crunched, a thorough financial and risk analysis was conducted. The ROI measured the profit or cost savings realized. It was calculated by estimating, for a 3-year period, the investment was made and the resulting profit created through that investment.

The results were conclusive. Nissan and IBM entered into their agreement and operations scheduled to commence on October 1, 1999.

Conclusion

I. Did Nissan’s BPO reach its stated objective?

Nissan’s stated objective for the outsourcing of the IT infrastructure was to control expenditure, improve efficiencies, and update the infrastructure. By outsourcing to IBM, Nissan achieved all of its goals.

In controlling expenditure, outsourcing gave companies the opportunity to have a predictable monthly budget for expenditure. That amount may or may not have been lower than current expenditures but the component that was crucial to a large organization such as Nissan was that the amount is predictable. There was no variable component to the pricing. The only time the pricing may have fluctuated was when additional services, which were out of scope of the contract, were required.

In Nissan’s case, that was never a requirement. The company was in the first stage of a major, global, restructuring project and there were no new initiatives taking place.

The second objective in the BPO was to improve efficiencies. IBM is the world’s largest information technology company with revenues close to $100 billion [9]. When companies outsource their operations to IBM they are gaining best-of-breed technologies, excellent consultants and some of the best systems architects money can buy.

The way that any global outsourcer makes its money is by achieving economies of scale. The only way to achieve these economies of scale is to ensure that they deploy the best hardware, software, and infrastructure possible and make that equipment work to maximum efficiencies. By taking full advantage of this best-of-breed technology, Nissan met its second and third stated objectives.

II. What if the IT Infrastructure had been retained in-house?

If Nissan had decided to retain its IT infrastructure in-house and attempted to implement an updated and modernized system, it would have lead to a significant increase in their expenditure. Ghosn’s prime objective, when he took over the company in 1999, was to reduce expenditure by 700 billion Yen [2]. He was not interested in spending any additional money to modernize existing equipment.

To support the intended improvement in competitiveness, Nissan had to ensure that their infrastructure supported the additional workload. There was no way they could do the intended improvement in efficiencies without external support. Nissan did not have the expertise and the additional work force to handle the required upgrades and the reengineering of business processes.

III. Final assessment and summation of the relationship

Robert Greenberg, Nissan’s CIO of North America was on record as saying in 2006 that, “We were happy with the services from IBM but the world had changed.” This comment sums up the relationship as it stands now, almost 8 years later [5]. When Nissan announced its Revival Plan, in 1999, the company had very clear objectives; cut costs, and return to profitability.

Nissan was looking for help in 1999 and IBM fulfilled this role for their IT Infrastructure. Greenberg also stated in his Q&A that “One of the things that also took place with the original outsourcing to IBM was we probably outsourced too much.” [5]

Greenberg was not working for Nissan when the original outsourcing decision was made in 1999; he only joined the company in 2005. He is on record though as saying that he thought that they should have either retained some of the infrastructure in-house or perhaps have multi-sourced, thereby ensuring that they had the best possible solution and price.

In 2006, when the contract came up for renewal, the CIO decided to put everything out to bid and compare what the other vendors were offering with what IBM had provided for so many years. The decision to look at new vendors was actually excellent timing for the company as Nissan had decided to relocate their North American corporate headquarters from Los Angeles, CA to Nashville, TN and any transition could be timed to coincide with the move.

Ultimately, what Greenberg opted to do was to accept IBM’s proposal to “manage desktop systems, network services, help desks, dealer systems, and other key infrastructure elements for Nissan North America.” He then outsourced the application and maintenance to an Indian firm, Satyam and brought the remainder of the services back in-house [5].

When asked about the decision to bring IT back in-house, Greenberg said, “By bringing it in-house you increase the alignment. It’s a matter of building the knowledge internally [that] can be used to help drive the business activity, which is much harder when a business analyst function is sitting within a third party.” [5]

IV. Does the cost of implementing an in-house solution outweigh the benefits or does BPO make more sense?

As Stephen Withers stated in his article, BPO decisions should not be made for cost-cutting exercises but rather for strategic directions [1]. In other words, companies should not view BPO as a cost saving tool. Outsourcing the IT operation makes sense when an organization is looking to improve efficiencies and business processes or when they cannot attract, or retain, the human capital who have the expertise and ability to modernize or improve the infrastructure.

Nissan’s CIO Robert Greenberg thought that he would actually save money by bringing some of the work back in-house because he was “not paying margin on the individual [headcount].” [5]

Some of the individual lessons that Nissan’s Greenberg has learnt from the outsourcing agreement with IBM has been that certain services developed by the IT organization can indeed be outsourced or developed externally. However, he felt strongly about retaining in-house IT skills in such value generation areas as business analysts who have a strong understanding of the business, sometimes even better than the business customer does. Insourcing these skills could result in ideas and dialog with the business, with the end result being a service delivery or product development than can then be outsourced.

In summary, the answer to the question, ‘Does the cost of implementing an in-house solution outweigh the benefits or does Business Process Outsourcing make more sense?’ is that it depends. It depends on the available skills; it depends on the overall objectives (cost saving vs. process improvement) and it depends on the organization. For the most part the majority of major corporations world wide that have been through an outsourcing contract or are in an outsourcing contract will agree that there are substantial benefits to implementing an outsourcing contract and there substantial benefits in retaining those skills in-house. What each organization needs to do is ascertain which of those benefits outweigh the other and base their decision on that analysis.

Works Cited

[1] Withers, Stephen. “BPO: Save money or fix your processes?” ZDNet.com

[http://www.zdnet.com.au/insight/business/soa/BPO-Save-money-or-fix-your-processes-/0],139023749,139156391-10,00.htm 17 August 2004. Downloaded October 22, 2007

[2] Magee, David. Turn Around: How Carlos Ghosn rescued Nissan. New York: HarperCollins Publishers Inc, 2003.

[3] Moynihan, Ann. “Outsourcing enables owner to focus on core business.” http://www.bizjournals.com/albany/stories/2002/10/14/focus10.html October 11, 2002. Downloaded October 22, 2007

[4] IBM Press room press releases. IBM.com “Extending Their Global Partnership, Nissan, and IBM Announce IS Outsourcing for Japan” http://www-03.ibm.com/press/us/en/pressrelease/1670.wss June 19, 2000. Downloaded October 19, 2007

[5] Thibodeau, Patrick. “Q&A: Nissan CIO reshapes automaker’s IT”

[http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleId=110024&intsrc=industry_list] March 29, 2006. Downloaded October 23, 2007

[7] McDougall, Paul. “IBM, Nissan Outsourcing Deal Spans The Globe” http://www.informationweek.com/outsourcing/showArticle.jhtml?articleID=181502685 March 10, 2006 10:00 AM. Downloaded November 02, 2007

[8] Ikin, Paul. IBM Representative on Nissan Global team. 1998 to 2001.

[ad_2]

Source by Paul Ikin

My Car Has Hail Damage, Now What?

[ad_1]

So your car got hit by hail now what do you do? If you’ve ever had your vehicle damaged by a hail you know it can be a very frustrating and expensive experience. Well if you have full coverage insurance on your car it doesn’t have to be frustrating or expensive. Often people don’t understand how to properly utilize there insurance coverage and are even afraid to claim the damage for fear that their rates will go up. This is a common fear but let me assure you a comprehensive claim such as hail damage doesn’t not raise your rates. In fact, if you don’t claim the damage and have it repaired you risk having any future claims being denied because of unrelated pre-existing damage.

The first thing you should do is call your insurance company and file a claim. Make sure you write your claim number down and it is always a good idea to ask the name of everyone you talk to and adjuster being assigned to your claim. The next step is the initial inspection or the “estimate.” Some insurance companies will ask you to go out get three estimates and hen fax them in. If your insurance company asks you to jump through these hoops just politely say NO. Ask where you need to go to have “them,” write “their,” estimate. Thats it, do not waste your time driving around getting multiple estimates because in the end your insurance company is just going to use those estimates as a starting point and write their own anyway.

An estimate means just that. It is an estimate of how much money and what the insurance company thinks it will take to repair your car. It is very important that you clean your car before having it inspected because you wont get paid for dents the appraiser can’t see. Secondly it is extremely important that you are as nice and as accommodating to the appraiser as you can be. It will do you no good to argue with or be rude to the person deciding how much money your going to get to have your car repaired.

Often times when there’s a large storm event the insurance companies are overloaded with claims and the have to outsource to independent appraisal services to help write all the claims that are pouring in. This is commonly referred to as a catastrophe team or “cat team.” Now I don’t think I have to tell you that these very busy appraiser’s are going to fly through your estimate as fast as they can and will probably miss a bunch of things. You may think your estimate looks a little low. In my line of work 90% of the estimates are written low. I’ve seen estimates for $1500 on a car that had over $6000 in damage. Don’t worry that estimate is not the final word it is merely a starting point. Unfortunately many people choose to keep they’re insurance money and never get their car fix. Some people even wait around til it hails again nearby and try to claim the un-repaired damage again. The insurance companies lose millions of dollars every year to fraudulent claims. It is impossible for them to keep track of every claim and they can’t force you to get your car fixed. The only way the insurance companies can combat this is by writing their initial estimates a little on the lighter side. I’ve had many appraisers tell me that their company actually trains them to feel the customer out and if they think they probably wont have their car repaired to write the estimate for as little as possible. Obviously if you have a brand new BMW your going to get it fixed but if you a 1984 Toyota Corolla with 350,000 miles on it you are probably going to keep the money, right?

The next step is to find a company to repair your dents. If you have large dents with paint damage and broken windows you will probably need to find a full service body shop. If you have mostly quarter sized dents and the damage is just superficial then PDR is the best option. PDR, or paintless dent repair is a repair method in which the dents can be gently massaged out and the original factory finish is left undisturbed. A good PDR shop can make your car look exactly like it did before the hail damage. Most dent’s half dollar sized or smaller can be removed fairly easily and quickly. In a perfect scenario your car could be repaired in as little as a few hours. Well, the world is not perfect and depending on your insurance company’s original estimate it may take several days to get an appraiser to come back out and re-write their estimate. This process is known as a Supplement. Usually on the back page of your estimate there are instruction for filling a supplement. The insurance company knows that if a professional repair facility is doing the repair then they are going to catch all the dents that were missed and ask to be paid for every last little bolt or clip that has to be removed. This is standard procedure and most insurers actually have a supplement hot line that body shops can call to have an appraiser sent out to the shop.

Some insurance companies send an appraiser out right away while other companies can take 7-10 days. I won’t get into which companies are the worst but I will say that Progressive and Farmers are top notch! This is not a paid endorsement it’s just the painfully obvious truth. If I call farmers they are at my shop the next morning every time even though their policy is within 48 hours. Progressive is almost as fast within 48 hours usually. Some of the other companies won’t tell you when there coming and your at their mercy. This is usually the longest delay in the repair process but it is the most important. Often times we get twice as much money as the original estimate. This is very important because without this additional money you may get a shop to do a complete repair or worse you may have to pay money out of pocket.

The next issue is “deductibles.” You have a contract with your insurance company that you will pay the first $500, $1000, or whatever your deductible is, towards the repair of your vehicle. This money is always deducted out of the check your insurance company gives you and they leave it up to you to pay it or find a company that will fix it for less. Essentially any company that repairs your vehicle without requiring you to pay a deductible is giving you a “discount.” This is completely legal and in fact most PDR companies will not require you to pay your deductible. Make sure you get any promises made to you in writing. I also suggest you get an estimated length of repair time. At my shop we always provide a customer with a written quote of the exact amount due for the repair or we give the customer a guarantee in writing that we will complete the repair for the negotiated amount the insurance company issues payment for. If we file a supplement it is expressed that we earned that money in addition to the original estimate. It is very important that you have written proof that you as the customer will not have to pay more than “x” amount of dollars when your car repair is completed. If a shop is unwilling to put their promises in writing then you need to find a new shop.

Once you find your repair shop or PDR company it is important that you know where the shop is and meet the owner or manager. I know this sound’s weird but a large majority of our customers never come to my shop and meet me. Often they are approached by one of my sales personnel and they let them pick the car up and then deliver back to them when it is finished without ever coming to my shop. This is great for me but it is extremely scary to think how easily people just hand over their keys and insurance checks. I always recommend to my salesmen that they suggest to their customer that they at least come out to our shop so they know where their car will be. It is also a good idea to ask for references. Often times we have repaired other cars in the neighborhood and have satisfied customers just down the street. Also you should check out a companies website if they don’t have one or it is poorly put together that may be an indicator that the company doesn’t pay much attention to detail. For a company to not have a website today is almost inexcusable! You may also call the local better business bureau. Even if a company is not a member the BBB will still field complaints and keep files on companies that receive complaints. Also check with your insurer. The will have files on companies that have had complaints or are suspected of fraudulent activities.

In conclusion PDR is definitely a great alternative to traditional body repair, and with a little research and due diligence the average person can navigate the claims process and find a great shop to repair their car for little or no money out of pocket!

[ad_2]

Source by Matthew Barry

Accessories Designed For Utility Vehicles

[ad_1]

In many places all around the world, utility vehicles have become a staple for many businesses such as landscapers, contractors, painters, and other fields which require one to carry their equipment with them from one job to another. They offer a convenient means of transporting various items such as ladders comma, compressors, pipes, hoses, and a variety of other things, when they are needed for the work being performed. There are a range of accessories especially designed to enhance the functionality of these trucks.

The versatility of these vehicles is part of what makes them so attractive for contractors and individuals such as farmers, who need a way to transport their professional equipment. Fitting the truck with specialized utilities can increase the amount of usable space in the most efficient manner. These items permit one to customize the vehicle to their own unique needs and specifications.

The first item most people will purchase is a tray. This goes in the area formerly occupied by the bed of a pickup, and serves as the cargo transport surface. It differs from the traditional in that it sits above the wheel well, which makes taking equipment on and off easier by eliminating the need for bending and reaching, and provides an opportunity to add more customization for storage.

If the individual prefers, they can add drop-down sides and a tailgate to the tray to keep things inside the storage area. Steps may also be installed either along the sides, or at the rear of the vehicle. They are easily pulled down when one needs to step up into the tray, and conveniently fold up to be stored when not in use.

Another item that many people choose to have installed on the tray are tie-down hooks. These can be placed in specific locations along the edges, or they may be in the form of rails that run the full length of the bed, allowing for more versatility in where the ropes and straps may be secured. Articles of this type are very useful in preventing equipment and other cargo from sliding around during transport.

Ladder racks are yet another very common accessory chosen by individuals who use utility vehicles regularly. These custom fit items are installed directly to the tray and allow for over-sized equipment, such as pipes and tubes, to be carried above the cab of the truck. This practically doubles the amount of cargo space available.

Adding pull out drawers to the underside of the bed is another way to increase the amount of storage area on the truck. These items come in various sizes and are great for storing handheld tools and smaller items. They come fitted with with either key, or a hinge styled locks, for security and to prevent theft or vandalism.

Ute tool boxes come in a variety of different styles and sizes to accommodate the needs of many varied individuals. They are generally installed up against the cab of the truck and maybe of up to three levels high, featuring lift up lids, drawers, or cabinets. The types of accessories one chooses to add to their vehicle can make it easy to customize to their unique needs and preferences.

[ad_2]

Source by Chandni Naresh Wadhwani

Engine Mountings are What Hold Your Engine to the Car

[ad_1]

In a vehicle, what powers the vehicle ahead is the engine. How will the engine provide all the power if it is not firmly held in place? This crucial job is done by the engine mountings that hold the power train in place while it generates all the power to help the vehicle cruise along the road. A lot of research is continuously taking place on this rather small but most significant part of any vehicle. The engines mountings hold the engine firmly to the main chassis of the vehicle, thus preventing it from flying off once the accelerator is pressed in.

Engine mountings consist of two steel plates. These plates can bear the tremendous vibration of the vehicle as the acceleration increases. There is also a strong bolt that is screwed in to the plates – one end of the bolt is firmly sealed in the engine body, while the other end passes through the chassis into the second plate and is held in place with a lock nut. Between the two steel plates, is a thick rubber cushion known as bushing, which absorbs all the vibrations of the engine.

In fact, this is the primary shock absorber in the vehicle. As the engine revs up and moves the car forward, there is a huge power build up under the bonnet and the two mountings on the two sides of the engine holds this generator firmly in place. If there were, no engine mountings there would have been a huge noise under the bonnet, which would have been ripped off from the vehicle’s body, and the engine would have lunged forward and dropped off. Such is the power of these mountings that it not only holds the engine in place, the huge generator is never allowed to vibrate endangering the other components in the vehicle. More the vibration, more would be the ensuing noise, and the wear and tear of the vehicle body would be faster than normal.

Engine mountings today are becoming more and more sophisticated with more tough ingredients going into the hard steel to make it more load bearing and long lasting because the mounting is the last thing that any car owner would really like to worry about while driving. Mountings are made to last. They normally do not require a replacement throughout the life of the car. This of course depends on the type of roads and ruggedness that the vehicle has to pass through in the countryside.

Most American roads are sound and are made to allow fast movement of vehicles so in normal conditions cars are made to last a lifetime. However if you happen to live in the hilly terrains and have to commute between the city and your home every day that itself takes a lot of time, you would do better to keep a good check on the engine mountings along with all the other components of the vehicle. Get your car regularly checked by an expert mechanic who can locate cracks and the wearing away of the rubber bushings and advise replacements.

[ad_2]

Source by Wong Steven

Employee Motivation – 10 Tips to Boost Job Performance

[ad_1]

Increase Employee Performance by Harnessing the Power of Motivation

Employee motivation and productivity can be enhanced and improved by creating a work environment that maximizes the factors that affect performance. These factors are simple to understand, easy to measure, and can add tremendous value to any organization that is willing to implement them. Use these 10 tips to make sure that your employees are energized and inspired to produce the best results possible.

1. Interesting Work

Intrinsic motivation comes from the shear joy and pleasure of doing a task. When you read a great book, no one has to pay for each page you read. It is a pleasure to learn how the story unfolds and watch the plot develop. It is the same way with employee motivation. To maximize employee performance, find out what employees like about their jobs and then try to add more tasks that align with their own natural interests and talents.

2. Appreciation & Recognition

William James said, “The deepest desire in human nature is to be appreciated.” It does not matter how much you pay someone, everyone want to know that their efforts are being seen and appreciated, especially by their manager. Don’t just send them a thank you e-mail – that just means you care enough to hit the “Enter” key. If you really want to thank someone buy them a real “Thank You” card and describe how their behavior and performance has added value to the team and organization. Make it a point to catch people doing things right and they will inevitably do things right more often.

3. Feeling Involved In the Work Process

Research shows that when people get to participate in creating a system or process, they are much more likely to follow it than one simply imposed upon them by an outside expert. Recognize that the people doing the job have the knowledge of how things can be done better, faster, and cheaper. If you want them to tell you, then make it easy for them to offer suggestions and reward employees who contribute ideas that add value to the bottom line.

4. Achievement

Napoleon once remarked, “It is amazing how willing men are to risk their lives for a little bit of tin and ribbon to wear upon their chest.” Awards and prizes can serve as a great motivator to harness the power of healthy competition. It is always better to use rewards that are meaningful and inspiring. When an employee exceeds your expectations, then make sure you recognize their achievement. On the day someone retires, they will pack up these awards and prizes to serve as fond reminders of a wonderful career.

5. Job Security

If everybody had what it takes to be an entrepreneur, then there would be no General Electric or Toyota and we would all be buying products from artisans and craftworkers. Thankfully, many people prefer to be part of a large organization and can be more productive when they get to focus on doing their job instead of worrying about developing a business plan or marketing strategy. Telling people that they are lucky to have a job creates an atmosphere of fear and worry that decreases job performance. Instead, tell your employees that the company is lucky to have such a skilled and committed workforce and people will take pride in their work and their company.

6. Increased Responsibility

We all know that some employees lack ambition and have no desire to advance on the job, but the vast majority of workers want a chance to take on more responsibility and add more value to the organization. Always be aware of opportunities for training that will equip your employees with the skills and tools they will need to advance in their career. Always try to fill open positions with internal applicants before looking for an outside candidate. This will create a culture of career development and preserve institutional memory and organizational knowledge so that it can be transferred to rising employees as they advance in their own career.

7. Good Wages

Robert Bosch, founder of the world’s largest automobile parts supplier, said, “I do not pay good wages because I have a lot of money; I have a lot of money because I pay good wages.” If you want motivated, high productive employees you have to pay such people according to their ability and performance. Good employees are motivated by more than just good wages, but never allow low wages to be the wedge a competitor can use to steal away your best people.

8. Good Working Conditions

If you want to get the most out of people you need to create an environment that facilitates success. At the minimum, you must offer a safe, clean, and sanitary work site. To get the most out of employees, help them take pride in their workspace, even if it is only a cubicle or workstation. Allow people to personalize their own work sites with photos or small trinkets so they will feel like they have a place that belongs solely to them.

9. Being Part of a Team

Being part of a dysfunctional team is an emotionally draining experience that results in low morale, low productivity, and high turnover. The great coach, Vince Lombardi, once remarked, “Individual commitment to a group effort — that is what makes a team work, a company work, a society work, a civilization work.” We are all social beings and we all want to be part of a healthy team where we can give and receive support, help, and encouragement. Organizations can harness this natural human desire by aligning employee efforts to achieve goals that are mutually beneficial to both the organization and its employees.

10. Help with Personal Problems

How many times have you heard about a bad boss who told their employees to leave their problems at the door so they could focus on their job? Unfortunately, they probably left their motivation and productivity at the door as well. Smart managers know that it is not their job to be a counselor or therapist, but it is there job to recognize when one of their employees is having personal problems that are affecting their job performance. They need to have open lines of honest communication so that employees can feel encouraged to ask for help and then be directed to their Human Resources Department or their Employee Assistance Programs.

[ad_2]

Source by Thomas Haizlip

Is There a Difference Between 6 Sigma, Lean, Kaizen, BPM, Continuous Improvement, and Reengineering?

[ad_1]

Anyone new to process work can easily become confused by so many different terms that seem to mean the same thing. I wonder sometimes why we keep adding new terms to what basically comes down to “quality.” All these techniques have the same goal — to achieve improvements in delivering a product or service to the customer. “Improvement” may follow the form of more efficiency for the business or more effectiveness for the customer. All methods have a connection to the Total Quality Management (TQM) movement promoted by gurus such as W. Edwards Deming and Joseph M. Juran, among others. Some offer a more philosophical approach than a specific set of tools.

With so many techniques to choose from, do you select the newest, the trendiest, or perhaps the tried and true method? Do you have to choose one technique? Why not take the best from all and call it something else that works in your culture. You can simply call your technique Business Process Improvement, Continuous Improvement, or something similar that works in your organization. The name you decide to use makes a difference in the acceptance rate at your company because as we all know “culture trumps process all the time.”

You may find my simplified explanation of the various terms (in alphabetical order) helpful:

  • Business Process Management (BPM): A recent term that denotes process management software. It comes from the IT world and companies that have software to sell, promote this technique. It attempts to continuously improve processes by promoting business efficiency, effectiveness, flexibility, and integration with technology. I view it simply as a new spin on using technology for process improvement…not a bad thing, but did we need another term?
  • Continuous Improvement: A more philosophical concept than a technique, CI strives to constantly improve processes. It promotes a culture of innovation and constant improvement.
  • Hoshin Kanri: A strategic planning method that uses the collective thinking power of all employees to help a company rise to the top in their field. The concept of including “all” is key to Hoshin Kanri, so that the company focuses on a shared goal. “Hoshin” means compass and “Kanri” means management (or control).
  • Kaizen: The Japanese word for continuous improvement. “Kai” means continuous and “zen” means improvement. It is not another technique, but a philosophy that denotes incremental, constant, repeatable improvement.
  • Lean: Focuses on the flow of value to the customer – anything else is considered wasteful. Companies who follow Lean have the goal of reducing the time between a customer order and shipment by eliminating waste. When you think of Toyota, you think of Lean.
  • Lean Six Sigma: Sometimes viewed as the best approach, since it combines Lean and Six Sigma, this technique merges the “process variation” aspect of Six Sigma with the “process flow” aspect of Lean, both important concepts. However, the term seems more like a sales term to me.
  • Re-engineering: Focuses on the radial redesign of end-to-end processes. It ignores the current business process and starts by designing a new process from scratch based on customer needs. While popular in the mid-1990s, it did not see much long-term success because of the lack of focus on the change management or governance process.
  • Six Sigma: A statistical method (coined by Motorola) that looks to reduce variation in process performance and strives for near perfection. The “six” refers to six standard deviations. Walter Shewhart’s work in the 1920s showed that processes required correction when they reached three sigma from the mean. With the introduction of “belts” (credited to GE), it sometimes seems like Six Sigma is the best method, and while it does focus on preventing defects and helping you to understand process complexity, I do not believe that it alone is enough. If you use this technique, remember the cultural effect of any process changes.

In summary, all techniques focus on improvement; all have the customer at the core; and all want to improve the efficiency, effectiveness, and adaptability of the business. As you read more about these techniques, you may notice what seems like territorial wars between some of the methods – e.g., lean vs. six sigma, or continuous improvement vs. reengineering. While you will find some differences (evolutionary or revolutionary, ongoing or one time, specific tools), you will see more similarity than differences.

In the end, simply think process improvement and spend time defining what “quality” means to your organization.

Copyright 2011 Susan Page

[ad_2]

Source by Susan Page