Buying Your First Car? Here’s What You Need To Know

[ad_1]

There are bound to be some pressing questions on your mind and for this very reason, we’ve compiled a comprehensive buyer’s guide focusing on the safety, affordability, maintenance and practicality when choosing the ideal car.

Let’s first take a look at the advantages and disadvantages of buying a new or used car.

Advantages of buying a new car

  • You’ll generally get a comprehensive warranty package.

  • No previous wear and tear, mechanical or body damage.

  • The dealer may offer financing at a lower interest rate.

  • You could be offered additional options and features.

Disadvantages of buying a new car

  • The purchase price is usually much higher.

  • Value greatly depreciates the moment you drive it off the floor.

  • New upgrades or features could take effect soon after purchase.

  • Insurance, taxes and registration fees are higher.

Advantages of buying a used car

  • The purchase price is lower overall and could be even lower if you buy privately.

  • Used cars continue to depreciate, but typically the most during the first two to three years.

  • You can sell it for almost the same price you bought it for if it’s well-maintained.

  • Insurance rates tend to be lower.

Disadvantages of buying a used car

  • May not be as reliable as a new car unless you buy a certified pre-owned vehicle.

  • Interest rates could be higher when financing.

  • Limited or no warranty.

  • Higher maintenance costs.

  • You can’t pre-order the car with the features of your choice.

Here’s what you should know when buying your first car

1. Applying for Finance

Once you’ve done all your homework on the car you want and you know you can afford it, applying for finance is simple. Visit the dealership where a Finance and Insurance (F&I) representative will be able to give you advice, explain everything about the loan application and help get the wheels rolling.

2. There is no such thing as a silly question

Dealerships have their own F&I representatives who are registered with the National Credit Regulator who will guide you through the entire purchasing process. When you go to the dealership to close the deal on your first car, don’t be shy to ask questions if you don’t understand anything. This is your last chance to do so before signing on the dotted line.

As exciting as it may be to drive away in your new car, be patient and don’t rush the process. Here is another interesting article with a few more tips on buying your first car.

3. Know your budget

There’s no denying that car payments go beyond just the monthly repayments. You need to be honest with yourself as to what you can really afford. Remember to include insurance, fuel and running costs to your budget. If you can’t really afford the fuel or maintenance cost for a big 4×4, consider something more fuel-efficient and affordable. Great options currently in the market are snazzy Datsun GO and the gutsy Renault Kwid.

4. Forget the debt

Life is too short to worry about unnecessary debt. If you can’t afford an expensive car, be patient and avoid balloon payments where possible. If you can afford to, rather choose the shortest possible term for the loan even if it means your repayments are slightly higher. The sooner you pay off your car, the sooner you will be debt-free.

5. Insurance is non-negotiable

Before taking to the road in your new car, you need to produce proof of insurance. If you have pre-existing cover, simply provide them with your document and if the dealership arranged insurance for you, they will already have it on file.

You are required to maintain comprehensive insurance on the car for the duration of the financial agreement. This not only protects you and your finances, it also gives you peace of mind knowing you are covered. Your insurance will pay out the insured value of the car should anything happen which means you don’t have to continue the repayments on a car you no longer have.

Consider this when car-hunting in South Africa:

1. Is it affordable?

Budgeting is important for many South Africans as not everyone can afford to pay the current price for new cars, not even the ‘entry level’ or ‘budget’ ones. The used car market provides many good options but you have to do thorough research before buying anything.

2. How well has it been maintained?

Maintenance is as important as affordability if not more as you can always plan and manage your monthly repayments but not so much the unforeseen maintenance issues.

More often than not, a used car will no longer have a service plan which means the car owner needs to pay for all repairs and services out of pocket. Where possible, choose a car with a full service history (FSH) and a strong national dealer network. Make sure you can afford out-of-warranty repairs or services from new tyres and shocks to engine or transmission issues.

3. What is the level of safety?

Looking back in history, for a long time, only the most expensive cars had additional safety features. Nowadays airbags, ABS, EBD, impact bars and crumple zones are more common. Considering the rising death toll on South African roads over the last few years, these safety features have become more a necessity than a luxury.

Remember to check the following when buying your first car:

  • Condition of all safety belts – strength, intensity and resistance.

  • Ensure that there is a legal amount of tread on all the tyres and don’t forget the spare wheel. In some cases, you can ask the dealer or seller to fit new tyres if necessary.

  • Test the hooter and all the lights outside and inside the car.

  • Ensure that the vehicle tool kit is complete and check that the car jack is in working order.

  • Ask for the car’s accident history report. Some dealers may not tell you this unless you ask.

  • Research the vehicle’s NCAP safety rating.

4. Is it practical?

Find an affordable car that is suitable and practical for you or your child. Check that the boot is big enough to hold a few suitcases and bags for a weekend away. A two-door car might seem like a good idea but it is impractical. Loading and unloading passengers is not easy, the boot is small and not much leg- and headroom.

Consider what the car will mainly be used for and choose accordingly. Will it only be used to and from college or university or what about cross-country road trips? Perhaps your child is studying engineering, construction or a subject where they are likely to need something more durable and able to carry a heavy load at some point.

It’s important not to just buy the first good looking car you see as you might be stuck with it for years. Be smart, be patient and enjoy the ride!

[ad_2]

Source by Gemma Murray

SWOT Analysis of the New Honda Fuel Cell Vehicle

[ad_1]

Honda is changing the vehicle market as we know it, by making a vehicle that emits water vapor. Honda’s FCX Clarity fuel cell car is the new breed for green cars. This car has some similarities to hybrid, but nothing compares to its new fuel source hydrogen. Besides hydrogen it runs with an electric motor that generates electricity to the fuel stack and a lithium ion battery. The lithium ion battery serves as a supplemental power source. The lithium ion battery charges up while braking and decelerating. Some questions might arise when thinking about this new fuel cell vehicle, like what makes this car better than the other hybrid cars? What are the Honda FCX Clarity strengths, weaknesses, opportunities and threats?

One of the biggest strengths about this new fuel cell vehicle is that it emits water vapor and is designated as a Zero emission vehicle (ZEV). The environmental protection agency (EPA) has given this vehicle the lowest possible emission rating. It also can be driven up to 280 miles before being refueled with hydrogen. FCX Clarity is achieves an energy efficiency of 55% which is twice the energy efficiency of the hybrid vehicles and three times the efficiency of regular gas vehicles. Since FCX Clarity is more energy efficient it has been one of the first fuel cell vehicles to receive certification from the EPA and the California Air Resources Board. Unlike the hybrids the FCX Clarity doesn’t need to be plugged in to be charged up and there is no need for regular gas.

Honda has many opportunities with this new fuel cell vehicle. First off Honda is designing a home refueling station. No more worrying about going out and getting refueled at the pump. Home refueling stations will elevate the stress at the pump. Also, Honda could make this fuel cell vehicle a household name and market this vehicle all over the globe. Honda just needs to get out there to show off their new vehicle. Honda is starting to market the new fuel cell a little bit. Honda has just released the FCX Clarity for Japan.

One of the few weaknesses for this fuel cell vehicle is its limited availability in the United States. Southern California and Japan are the only two areas where this new vehicle is available. Honda plans to release around 200 vehicles in 3 years in California and Japan. Honda believes that this new fuel cell vehicle will be able to be mass produced by 2018. I think this is one Hondas biggest downfall is the limited release and so few refueling stations.

This car is a little small it’s only able to carry four people. The cost of the FCX Clarity is about 600 a month on a 3 year lease. It seems a little steep for someone who is middle class to afford that payment. Not anyone is California will be able to lease this new vehicle. These people who are selected live near the refueling stations and they make a limited amount of commutes.

Basically Toyota and GM vehicles are Hondas biggest threat. With so many new hybrids and small gas efficient cars, this creates a problem for Honda. Another threat is Chevrolet. Chevrolet has developed a fuel cell SUV “the Equinox” and it has already arrived at New York City, Washington D.C. and Southern California. With this being said, it becomes a race between Honda and Chevrolet with the new fuel cell technology. How would the new fuel cell FCX Clarity size up in popularity? The lack of mass production and refueling stations, Honda won’t have a chance.

I think Honda has come up with a good concept car with its new fuel source. The new fuel source needs to be researched further before they should market this vehicle. This car is for people who are willing to go green and have the money to do it. The whole problem is making this car available to the public and easily accessible.

On the other hand Honda has a comparative advantage because of their home refueling station. There is no other vehicle out there that you can just plug in and refuel at home. Hybrid vehicles rely on battery and gas to run. You have to plug the hybrid in to recharge the battery.

[ad_2]

Source by Richelle McGinnis

Types of Boom Truck Crane

[ad_1]

The boom truck crane is a heavy-duty piece of machinery that is used on a wide range of projects to lift, lower or load heavy objects. The versatile nature of this truck means it is easily adapted or outfitted to match its specific role, such as different material, freight, or transport handling tasks. Plus, it has the ability to travel from site to site with complete ease and set-up is a simple and straightforward process.

The basic parts of this type of truck consist of a turntable, center post, or similar rotating platform, a telescopic or fixed boom, and a control cabin with operating machinery. Plus, for extra stability when lifting or lowering loads, the trucks come with stabilizers and outriggers.

What are the different boom truck crane models?

The main types of a boom truck crane include the swing cab and fixed cab. Each of these vehicles has its own characteristics to make it a practical choice to work on different heavy lifting tasks.

Fixed cab – the fix cab crane is built with a cabin for the operator that is restricted to facing one direction. This does have the benefit of permitting a greater load limit, but it is not so versatile when it comes to mobility. However, this crane still has a boom that can be moved in any direction.

Swing cab – the swing cab is a more versatile design for the truck and makes it possible for the operator’s cabin to move in line with the boom’s movement. A great benefit of this design is the improved vision and greater range of mobility. Plus, this truck can accept different types of booms that range from the telescopic to fixed units. The telescopic booms are preferred for the improved reach and more practical uses.

Other types of boom trucks

There are several other vehicles of this type, including the bucket or aerial trucks. This truck is a practical choice for utility, forestry, and telecom companies that need to perform a variety of jobs at height. The truck has a lifting arm that has a bucket attached to the end. This gives a safe and stable platform for a worker to stand in. For extra safety, the buckets can be made in fiberglass or other dielectric materials to give reliable insulation against electricity.

The attached buckets can also be fitted with a wide range of accessories to make the work environment safer and more convenient. Some of the popular accessories include a bucket step for easier access, a wire dispenser, an air compressor, and a boom strap to secure the operator to the boom to avoid falls.

[ad_2]

Source by Leo Eigenberg

What Is an Air-Mover Vacuum Truck?

[ad_1]

Air-mover vacuum trucks (also known as wet/dry vacuum trucks) are typically designed with a high air flow capability of 5,000 to 6,000 cfm with a vacuum pump of 27 to 28 inches with either dual or tri lobes. They also have the same components of standard vacuum trucks, such as the bag chamber with filter bags; the cyclone separator; and the tank. The following is a list of important component options of this extremely versatile piece of equipment that will greatly enhance its performance.

  • Hydraulic Boom – This component is very helpful for trench or sewer applications as well as when the location of the task is over a fence or a wall. Hydraulic booms enable operators to have additional tubes that can be lowered directly to the site of the sludge or waste material. Operators can position themselves in a safer and cleaner location rather than controlling the hose manually.
  • Advanced Pump System – There are different pump systems such as sludge or vane models that can be installed in these specialty trucks. The sludge version is used to pump liquid or sludge materials from a tank. The vane version can be added to blow materials out from the body. It can also be used as an auxiliary pump to suck up liquid material and is also known as the body pressurization or auxiliary vane design.
  • Unloading Options – There are at least two unloading options for air-mover trucks: pneumatic unloading and high dump systems. A pneumatic unloading system uses a component that enables the equipment to unload the material directly into a silo, storage containers or hoppers as well as into another truck tank or body. Another option for unloading material is the high dump system; the tank is raised to discharge material into a container or is taken directly to the disposal site.
  • Detachable Separator – A detachable separator can be added and is very useful, especially under circumstances that require the unloading of material into bags, barrels or open containers before they even enter the tank. Therefore, this component is very effective, especially when handling hazardous material. It enables simultaneous vacuuming and the continuous unloading of material.
  • Rail Wheels – Rail wheels can be installed on air-movers so they can be used on railroads and operate on the railroad tracks. Usually rail wheels are mounted on the rear and front of the truck, and rear seats and platforms can be installed to allow the operators to use the system on the railroad tracks. In order to propel the air-movers forward and backward on the railway, a creeper system is installed to the unit.
  • Sound Suppression System – One of the biggest problems with many vacuum trucks during their operation is the high volume of noise. A sound suppression system can be installed onto the vehicle, reducing the sound levels of the equipment during operation.

Air-mover vacuum trucks are an exceptional tool that offers great potential to many businesses. They operate efficiently and are very cost-effective for any vacuum extraction tasks. If business owners have sufficient knowledge about this equipment including its components, capability and operational requirements, such a vehicle can prove to be a wise investment. These units can be customized to meet the specific business needs of each company. Knowledge about the air-mover vacuum truck can allow a business owner to effectively increase productivity and profitability!

[ad_2]

Source by Christopher M. Hunter

GReddy Type RS BOV Vs HKS SSQV BOV – Comparing the GReddy and HKS Blow Off Valves

[ad_1]

Since 1994, both GReddy and HKS have been creating aftermarket blow off valves for turbo car tuners. Although they essentially do the same work and complete the same task, there are many differences between the GReddy Type RS BOV and the HKS SSQV BOV. Each have their own set of advantages and disadvantages; however, many turbo tuners trying to decide between the two blow off valves always seem to be torn on which on they should buy.

To help out the decision of which one to buy, here is how the GReddy BOV and HKS BOV compare with each other, in both the BOV sound and performance.

BOV Sound

To many people, the sound of the blow off valve is the most important part. When they cruise down the street, they want to be able to shift and have the sound effect enhance the look and quality of their customizations, so having a quality blow off valve sound can really catch people’s attention and make a statement.

The GReddy Type RS BOV releases its extra air pressure slowly, causing it to sound like air blowing. There really isn’t a loud sound, rather a subtle burst of air, which sounds exactly like air coming out of an air compressor. For many people, this just isn’t “cool” since it isn’t loud; however, sometimes staying “low key” isn’t exactly a bad thing, especially when you are driving on cop infested streets.

On the other hand, the HKS SSQV BOV can actually be three different sounds. You can either have no insert, a three arm insert, or a circular insert, which goes in front of the blow off valve’s release port of the valve. Leaving the inserts out allows you to have a quite sound, like the GReddy Type RS BOV has, while putting in either insert will allow you to have two very distinct and performance BOV sounds.

BOV Performance

The two blow off valves perform very differently, even though they complete the exact same task. The GReddy Type RS BOV works with a “push” valve, which allows the air extra air pressure to simply push out of the valve, once it reaches the valves threshold. This design is used in many blow off valves; however, it does leave the possibility of the valve leaking and giving a slow release.

The HKS SSQV BOV is designed completely different, as HKS wanted to design a “pull” valve system, which uses two valves and alternating pressures to pull open valves, in order to release excess pressure. This system is highly effective, as it prevents any leaking and gives off one solid burst of air releasing, as soon as the valve does open.

[ad_2]

Source by Christopher Kochan

The History of Republic Airport

[ad_1]

1. Farmingdale’s Aviation Origins:

Located in Farmingdale, Long Island, Republic Airport is an historically significant airfield to the region and the world, having played both military and civilian roles. But long before it became an airfield, it gave rise to the manufacturers that built airplanes.

“The Industrial Revolution and airplane manufacture came to Farmingdale during World War I when Lawrence Sperry and Sydney Breese established their pioneering factories in the community,” wrote Ken Neubeck and Leroy E. Douglas in their book, Airplane Manufacturing in Farmingdale (Arcadia Publishing, 2016, p. 9). “They were drawn by the presence of two branches of the Long Island Railroad… the nearby Route 24, which brought auto and truck traffic to and from the Fifty-Ninth Street Bridge in Manhattan; the level outwash plain, which provided land for flying fields; and the proximity to skilled workers… “

The area’s first aviation roots, however, were planted as far back as 1917. The Lawrence Sperry Airplane Company, incorporated that year with $50,000 of capital and located on Rose and Richard streets in the village of Farmingdale, produced its first aircraft in the form of the Messenger.

Designed by Alfred Verville of the US Army’s Engineering Division at McCook Field, the minuscule, 17.9-foot-long, all-wood biplane was intended for “aerial motorcycle” missions, alighting in small clearings to drop off and pick-up messages from field commanders, thus earning its name. Farmingdale’s aviation roots were equally cultivated by Sydney Breese, whose Breese Aircraft Company, located on Eastern Parkway, designed the Penguin. Resembling the Bleriot XI, the mid-wing airplane, powered by a two-cylinder, 28-hp, roughly-running Lawrence engine, was a non-flying, preflight trainer intended to aid US Army pilot transition from primary to operational types. Deployed on the open prairies of Texas, it sported a wingspan too short to produce lift, but allowed fledgling aviators to gain the feel of pre-departure aerodynamic forces on their horizontal tails. Of the 301 produced, only five were ever used for this purpose; the remainder were placed in storage.

2. Fairchild Aviation Corporation:

If Lawrence Sperry and Sydney Breese laid Farmingdale’s aviation foundation, then Sherman M. Fairchild cemented it.

Initially interested in aerial photography equipment, he founded the Fairchild Aerial Camera Corporation in 1920, selling two such devices to the Army, and further developed the company into Fairchild Aerial Surveys to engage in map-making when he had received a contract for an additional 20.

Seeking to replace the myriad of airplane types he operated with a single, specifically- designed camera platform, Fairchild devised the required specifications for one, but could not locate a manufacturer able to build it at a reasonable cost. Forced to do so himself, he established his third aviation company, the Fairchild Aviation Corporation, and moved into the Sperry factory in South Farmingdale, vacated as a result of founder Sperry’s tragic death in December of 1923.

The high-wing, strut-braced, single-engine utility aircraft, designated FC-1 and first flying in prototype form in 1926, featured an enclosed and heated cabin to protect the pilot and his camera equipment, but its original OX-5 engine proved inadequate. Retrofitted with a higher-capacity Wright J-4, it was redesignated FC-1A.

The FC-2 production version, supported by wheels, floats, or skis, featured increased cabin volume. Powered by a 200-hp Wright J-5, the aircraft, intended for commercial operations, sported a 31-foot overall length and 44-foot wingspan. Accommodating a single pilot and four passengers, or up to 820 pounds of cargo, it had a 3,400-pound gross weight and could attain maximum, 122-mph speeds and operate 700-mile segments.

Demand at the South Farmingdale factory soon eclipsed capacity. After aerially surveying the region, Fairchild himself chose a 77,967-acre alternate on the south side of Route 24 and Conklin Street in East Farmingdale, a site which offered prevailing, South Shore winds and multiple-mode ground access by means of a railroad line and the major, Route 110 corridor, which would facilitate both personnel and raw material transport to the new field. Repackaged into airplanes, the latter could then fly out.

“The 77,967-acre Fairchild Flying Field was developed in the late winter and early spring of 1928 and was originally owned and operated by the Fairchild Engine and Airplane Manufacturing Company,” according to the Long Island-Republic Airport Historical Society. “The first flights from (it) took place in (the) late spring of 1928 after the Fairchild Airplane and the Fairchild Engine factories were completed and aircraft were produced (there). Fairchild built Model 41, 41A, 42, 21, 100, and 150 airplanes… “

Wings, like those of the Hempstead Plains to the west, once again rose from the farm fields of Long Island, built, propelled, and supported, respectively, by the Fairchild Airplane Factory, the Fairchild Engine Factory, and the Fairchild Flying Field, after Faircam Realty, Inc., purchased the land and its initial layout was established on November 3, 1927.

Although Fairchild produced multiple models at its new Long Island aviation center, its roots would quickly prove tenuous. Moving its headquarters to Hagerstown, Maryland, in 1931, after only three years, it vacated its facilities, which were almost immediately reoccupied by the American Corporation, or AVCO, whose Airplane and Engine divisions produced the Pilgrim 100 transport for American Airways. But the Depression, taking too large a bite out of the economy, severely diminished demand for it, since aircraft acquisitions were high on a company’s cost reduction list, and its presence proved shorter than Fairchild’s. By mid-1932, it had equally disappeared.

3. Grumman Aircraft Engineering Corporation:

Initially located in Valley Stream, where it designed floats, the Grumman Aircraft Engineering Corporation moved further east, to the Fairchild Flying Field, and took up residence in the former Fulton Truck Factory, where it hatched its first production fighter, the FF-1. Powered by a single, 750-hp Wright engine, the biplane, with a retractable undercarriage, was also offered in scout configuration, as the SF-1.

The most significant aircraft to emerge from the East Farmingdale production line, however, was the Duck. Tracing its origins to the Loening Aeronautical Engineering Corporation’s XO2L-1, it had been submitted to the US Navy in 1931, but, since Loening himself lacked the required facilities to build it, he turned to Leroy Grumman, his former colleague, who re-submitted it in modified form. Accepted on April 25, 1933, the biplane, called XJF-1, was powered by a 700-hp Twin Wasp engine, which drove a three-bladed Hamilton Standard propeller. Its bracing, consisting of one set of struts outboard of the fuselage and a second one, of wires, between the two wings, was minimal for its day. Water operations were supported by a centerline, under-fuselage float, into which the undercarriage retracted.

In all, 632 JF and J2F Ducks were produced, pressed into global, multiple-role service.

Although Grumman’s Farmingdale presence exceeded that of all others, it nevertheless ended after a half-decade, in 1937, when it relocated to larger headquarters in Bethpage, Long Island.

4. Seversky Aircraft Corporation:

Seversky Aircraft Corporation next took center stage in Farmingdale when it relocated there from College Point in Queens, occupying the former American Corporation factory.

A decorated World War I ace, Alexander P. de Seversky, like Igor Sikorsky, immigrated to the US from Russia, and in 1923, developed the first gyroscopically-stabilized bombsight at the Sperry Gyroscope Company, before establishing his own Seversky Aero Corporation, which focused on aircraft instruments and parts.

Injected with fresh capital, it initially occupied the EDO Corporation’s floatplane factory.

His first major design, the SEV-3, was both aerodynamically sleek and progressive, reflecting Seversky’s aviation-intuitive nature. Powered by a single, 420-hp, nose-mounted, Wright J-6 Whirlwind engine, the all-metal, low-wing aircraft, accommodating a pilot and two passengers in sliding, tandem canopied cockpits, was either supported by a wheeled undercarriage or floats, and in 1933 established a world speed record for piston amphibians. Two years later, on September 15, it sustained a 230-mph airspeed.

The foundation of many subsequent versions, which externally exhibited only minor variations over the basic design, it evolved into the next major iteration, the BT-8. As the first all-metal, enclosed cockpit design operated by the US Army Air Corps, it featured a 24.4-foot length and 36-foot wingspan. Powered by the 400-hp Pratt and Whitney R-985-11, the 4,050-pound airplane, accommodating two, had a 175-mph maximum speed. Thirty were built. It led to the definitive version.

Originally occupying Hangar 2 on New Highway and today used by the American Airpower Museum, Seversky Aircraft Corporation took over the Grumman factory in 1937 when it had relocated to Bethpage, thus maintaining two facilities. But, echoing the short history of the East Farmingdale airfield’s tenants, it came to an abrupt end: although Seversky, like many other aviation-minded “geniuses,” possessed the necessary design skills to create progressive airplanes, he lacked the necessary managerial flip-side of the equation needed to devise a proper, and profitable, business plan to market them, resulting in a $550,000 loss by April of 1939. While conducting a European sales tour six months later, on October 13, he was ousted by his own board of directors, who voted for his removal from the very company he had founded.

Reorganized, it was rebranded “Republic Aviation Corporation.”

5. Republic Aviation Corporation:

Fairchild Flying Field’s fortune was about to change. Fueled by World War II, the fledgling Republic Aviation Corporation would explode in size and its roots would become so deeply implanted in Farmingdale soil that it would be decades before they could be unearthed.

Instrumental in that war was the Republic P-47 Thunderbolt.

Succeeding the Seversky P-35, it was the result of Army Air Corps requirements, which included a 400-mph airspeed, a 25,000-foot service ceiling, at least six.50-caliber machine guns, armor plating protection, self-sealing fuel tanks, and a minimum fuel capacity of 315 gallons.

The Republic P-47 Thunderbolt, which dwarfed all other aircraft, was the world’s largest, heaviest, single-engine, single-seat strategic World War II fighter, offering unequaled dive speeds.

War-fed growth of the officially-renamed “Republic Airport” resulted in the expansion of the company’s existing factory on the south side of Conklin Street, as well as the construction of three additional buildings, the installation of a control tower, and the lengthening of its existing runways, all in an effort to support P-47 production, which totaled 9,087 units in Farmingdale alone and required a work force of 24,000 to accomplish by 1944. Employees filtered in by the thousands every day. A round-the-clock production line spat a completed aircraft out of the factory every hour, and these were then ferried by the Women Air Force Service Pilots, or WASPs. Republic Aviation, one of the country’s primary defense arteries, pumped man-and-machine into the agricultural plains of Farmingdale and transformed them into an arsenal of democracy within an 18-month period.

“By 1945, Republic was contributing more than 30 percent of the Army Air Force fighters to the war effort against the Luftwaffe in the skies of Europe,” wrote Leroy E. Douglas in his “Conklin Street Cut-Off” article published in the September 1984 issue of Long Island Forum (p. 182). “Thus, Republic, Ranger, and its 23,000 plus workers-more than half of whom were women-did their part to win the war.”

When World War II’s doors closed, so, too, did those of the Thunderbolt factory, and Republic was forced to diversify its product range in terms of purpose and powerplant, converting military Douglas C-54 Skymasters into commercial DC-4 airliners, producing 1,059 civilian Seabee amphibian aircraft, and attempting to design a passenger transport of its own.

The resultant aircraft, the Republic XF-12 Rainbow–along with the competing, and identically-powered, Hughes XF-11–both received a contract for two.

Emulating the graceful lines of the Lockheed Constellation, the Rainbow, featuring a 93.9-foot overall length and incorporating design experience amassed during Republic’s fighter aircraft development, exuded an appearance quintessentially captured by Aviation Week and Space Technology magazine when it reported, “The sharp nose and cylindrical cigar shape of the XF-12 fulfills a designer’s dream of a no-compromise design with aerodynamic considerations.”

Peace proved the aircraft’s enemy. The close of World War II obviated its (and the comparable Hughes XF-11’s) need. Nevertheless, because of its long-range, high-speed and -altitude, day and night, limited-visibility photo-reconnaissance capability, it was ideal as a territory-mapping platform. Indeed, on September 1, 1948, the second of only two aircraft built photographed its transcontinental flight path from the Air Force Flight Test Center in Muroc, California, to Mitchell Field in Garden City, Long Island, during Operation Birds Eye.

Returning to its military roots, Republic entered the pure-jet era with a P-47 Thunderbolt successor.

Featuring a 37.5-foot length, the design, conceived shortly before the end of the war in 1944, retained the straight wings associated with propeller airplanes. These spanned 36.5 feet.

First flying on February 28, 1946, the 19,689-pound fighter-bomber, designated F-84 Thunderjet and able to climb at 4,210-fpm, established a national speed record of 611 mph, as powered by the 3,750-thrust-pound J35-GE-7. Its range was 1,282 miles and its service ceiling was 40,750 feet. Its production totaled 4,455 units.

Development of its successor began in 1949. Because of an Air Force funding shortage, Republic reduced development costs by retaining commonality, to the tune of 60 percent, with the F-84, but introduced swept wings. The aircraft, powered by a 4,200 thrust-pound Allison XJ35-A-25 engine and initially designated YF-96A, first flew on June 3 of the following year, three months before it was renamed F-84F Thunderstreak.

Korean War-sparked fund increases enabled Republic to complete a second prototype, which first flew on February 14, 1951 with a YJ65-W-1 engine, and it was followed by the first production example, which took to the skies on November 22, 1952. The type was deployed by NATO countries during the Cold War.

F-84F Thunderstreak production totaled 2,713 airplanes.

Nevertheless, Ken Neubeck and Leroy E. Douglas summarized Republic-based aircraft manufacturing by stating in their book, Airplane Manufacturing in Farmingdale (pp. 7-8). “While aviation started in Farmingdale with cloth-covered triplanes and biplanes and prop engines, after World War II Republic helped moved the United States into the jet age with the F-84 and F-84F, which assisted US forces in Korea and NATO nations in the 1950s.”

6. Fairchild Republic Corporation

Although Fairchild departed the very airport it had created in 1931, that absence was short-lived. Reappearing three years later, it took up residence in its former engine factory as the newly formed Ranger Aircraft and Engine Corporation and remained there until 1948. But, for a second time, history was to come full cycle.

Acquiring Hiller Helicopters nine years later, it became Fairchild Hiller, and in July of 1965, it purchased the majority of Republic stock, resulting in the Republic Aviation Division of Fairchild Hiller. Fairchild had thus returned to the soil in which it had planted its first seeds. In 1971, it continued its buying spree, purchasing Swearingen and producing and marketing the 19-passenger, twin-turboprop Fairchild-Swearingen Metro commuter airliner. The following year, the company adopted the official title of “Fairchild Republic.”

Its principle design, conceptualized before the Republic acquisition, was given birth by the Air Force requirement for a close air support aircraft incorporating simplicity, ease of maintenance, and short-field performance, in order to operate from small forward air bases close to the battle line.

Designated A-10 Thunderbolt II and enjoying a production run of 733, it was instrumental in the Gulf War and during Operation Iraqi Freedom.

7. Post-War Manufacturing:

Although Republic Airport and its aviation companies had been associated with mostly-military aircraft design and manufacture, several diverse commercial and space components also emerged from its doors.

Integral to the Boeing 747, for instance, were the leading edge slats, trailing edge flaps, spoilers, and ailerons built by the Republic Aviation division of Fairchild Hiller, while it was also contracted to provide a similar role in its proposed, but canceled, supersonic 2707 airliner.

Equally integral to the Space Shuttle were the Fairchild Republic components manufactured in Farmingdale.

After awarded a $13 million contract by Rockwell International of Los Angeles on March 29, 1973, Fairchild Hiller designed and developed six aluminum vertical tail stabilizers, which sported 45-degree leading edges and measured 27 feet high by 22 feet long, in Hangar 17, along with their associated rudders and speedbrakes. The first, installed on test vehicle Enterprise, facilitated its atmospheric launch from a piggy-backed 747 platform over Edwards Air Force Base on February 18, 1977, while the others were mounted on Space Shuttles Columbia, Challenger, Discovery, Atlantis, and Endeavor.

Expanding the commuter airliner involvement initiated with the Swearingen Metro, Fairchild Republic signed an agreement with Saab-Scania of Sweden on January 25, 1980 to launch the SF-340, in what became the first fully collaborative venture between a US and European aviation manufacturer. Fairchild Republic was contracted to design and build its wings, engine nacelles, and vertical and horizontal tail surfaces, with final assembly occurring in Sweden.

Fairchild Swearingen was assigned North American marketing responsibility, while a jointly owned Swedish company, Saab-Fairchild HB, established an office in Paris to fulfill this function elsewhere.

Powered by twin turboprop engines, the aircraft accommodated 34 passengers in a four-abreast configuration with a central aisle.

After completing some 100 wing sets, however, Fairchild terminated its contract work on the regional airliner, withdrawing from all civil projects, and the aircraft was redesignated the Saab 340.

8. Changing Roles:

Passed the ownership torch on March 31, 1969, Republic Airport was thereinafter operated by the Metropolitan Transportation Authority (MTA), which continued to transform it into a public-use entity by acquiring 94 adjacent acres from the US government and purchasing an additional 115 privately owned ones to the south and southwest.

“The Metropolitan Transportation Authority took title to Republic Airport as a first step in converting it into a general aviation (field),” according to the Long Island-Republic Airport Historical Society.

Initiating a modernization program, it made several improvements. High-intensity lights were installed on 5,516-foot Runway 1-19 and 6,827-foot Runway 14-32, for example, the latter of which was also equipped with an instrument landing system (ILS). The Fulton Truck Factory, the airport’s original structure dating from 1916, was razed, while Flightways transformed a ten-acre site on the north side of Route 109 into a complex of new hangars, administration buildings, fuel storage tanks, and aircraft tie-downs. A dual-level Administration, Terminal, and Maintenance building opened in 1983, not far from, and shortly before, the operational phase-in of a 100-foot, $2.2 million FAA control tower.

In order to promote economic development of the surrounding region, New York State legislature transferred ownership, for a third time, to the New York State Department of Transportation (DOT) on April 1, 1983, which was advised by a nine-member Republic Airport Commission. It hardly curtailed the modernization momentum.

Indeed, eight years later, a $3.5 million, 25,600-square-foot Grumman Corporate Hangar, replacing the aircraft storage facility previously maintained at its now-closed Bethpage airfield and housing a Beechcraft King Air, a Gulfstream I, and two British Aerospace BAe-125-800s, opened.

In April of 1993, ground was broken for a $3.3 million, 20,000-square-foot SUNY Farmingdale Aerospace Education Center on the east side of Route 110.

Million Air, a subsidiary of Executive Air Support, constructed an 11,700-square-foot Executive Air Terminal and corporate hangar on the airport’s south end, and, by 2001, Air East commenced operations in its own, new, radiant-heated, 10,000-square-foot hangar, which also featured a 2,500-square-foot shop and 4,500-square-foot office and flight school. Yet another hangar-and-office complex, located in the Lambert area, opened its doors in June of 2005 when Talon Air, a charter company, began operations from it.

In order to provide increased clearance needed by the latest-generation of business jets, such as the Gulfstream V and the Bombardier Global Express, taxiway B (bravo) was relocated.

Indeed, more than $18 million in capital improvements were made since 2000 alone.

These enhancements, provisioning the airport for its new, general aviation role, had perhaps been a premonition of things to come.

In 1982, Fairchild Republic won a contract to build two new-generation Air Force T-46A training jets; but, the milestone, initially envisioned as a monetary lifeline, only provided the reverse effect: although the prototype was first rolled out three years later, it lacked some 1,200 parts, and although the second made a successful, 24-minute maiden flight in July of 1986, the contract for the program, fraught with controversy, was canceled, resulting in the layoffs of 500 employees.

Like so many companies dependent upon military contracts for survival, Fairchild Republic, without choice, ceased to exist the following year, leaving its sprouting factories and a legacy, which had begun six decades earlier. Ironically, the two names which had been the most instrumental in the airport’s beginning and growth-Fairchild and Republic-were the same two which had been involved in its demise. The doors of the Farmingdale airfield’s primarily-military aircraft manufacturing and testing chapter thus closed, and those to its general aviation one opened.

“With the company experiencing major financial problems in 1986-1987 and with the loss of support for the T-46A program in Congress, Fairchild terminated both the SF-340 and T-46A production after building only four aircraft,” according to Ken Neubeck and Leroy E. Douglas in Airplane Manufacturing in Farmingdale (p. 99). “Thus, by the fall of 1987, seventy years of airplane manufacturing in Farmingdale ended with employment and economic loss to the community and the New York metropolitan area.”

9. Airline Service:

In 1966, a year after ownership of Republic Airport was transferred from Fairchild Hiller to Farmingdale Corporation, it was officially designated a general aviation (civil) facility, fielding its first landing, of a twin-engine Beechcraft operated by Ramey Air Service from Islip, on December 7. In order to transform it into a gateway by facilitating airline connections at the three major New York airports, the Metropolitan Transportation Authority contracted with Air Spur to provide this feeder service four years later, assessing $12 one-way fares.

Although Republic was never envisioned as a major commercial airport, its central Long island location, proximity to the Route 110 corridor, and considerable infrastructure poised it for limited, scheduled and charter service to key business and leisure destinations within neighboring states. Yet its inherent operational limitation was succinctly stated in the 2000 Republic Airport Master Plan Update.

“At Republic Airport,” it explained (Chapter 3, p. 8), “the New York State Department of Transportation implemented an aircraft weight limitation of 60,000 pounds in 1984. This weight limitation restricts the operation of aircraft over 60,000 pounds actual gross weight without the written consent of the airport operator.”

“Forecasts indicate that there will be an increase in the number of jet aircraft based at Republic Airport,” the Master Plan Update stated, “as well as an increase in jet operations,” as ultimately proven by annual pure-jet operation statistics: 2,792 in fiscal year 1986, 4,056 in 1990, 4,976 in 1995, and 6,916 in 1998. And, of its average annual number of based aircraft-about 500-this segment was also the fastest growing: 10 jet aircraft in 1985, 15 in 1995, and 20 in 1998. That number has since more than doubled.

One of the first scheduled airline attempts was made in 1978 when Cosmopolitan Airlines, operating an ex-Finnair Convair CV-340 and two ex-Swissair CV-440 Metropolitans in single-class, four-abreast, configurations, offered all-inclusive, single-day, scheduled charter packages to Atlantic City from its Cosmopolitan Sky Center. Its flyer had advised: “Fly to Atlantic City for only $19.95 net. Here’s how it works: Pay $44.95 for a round-trip flight ticket to Atlantic City, including ground transportation to and from the Claridge Hotel and Casino. Upon arrival at the Claridge, you’ll receive $20.00 in food and beverage credits good at any restaurant except the London Pavilion. You will also receive a $5.00 flight credit good for your next fight to the Claridge on Cosmopolitan Airlines.”

The carrier also briefly attempted to offer two daily scheduled round-trips to Boston on its 52-passenger CV-440s in 1980.

Facilitating this scheduled service growth was the construction of a passenger terminal.

“The terminal building, completed in 1983, has approximately 50,000 square feet of useable floor space and houses airport service vehicles, maintenance, fire protection, public terminal space, and rental areas on the first floor, plus administration offices on the second floor. Approximately 70 employees work in the building,” according to the 2000 Republic Airport Master Plan Update (Chapter 1, p. 17).

Attempting to establish a link between Farmingdale and the major New York metropolitan airport of Newark International in order to feed its departures, PBA Provincetown Boston Airline commenced shuttle service with Cessna C-402 commuter aircraft, connecting Long Island by means of a 30-minute aerial hop with up to five daily round-trips and coordinating schedules with PEOPLExpress Airlines. It advertised avoidance of the excessive drive-times, parking costs, and longer check-in requirements otherwise associated with larger-airport usage, and offered the convenience of through-fares, ticketing, and baggage check to any PEOPLExpress final destination.

According to its June 20, 1986 Northern System timetable, it offered Farmingdale departures at 0700, 0950, 1200, 1445, and 1755.

Demand soon necessitated replacement of the C-402 with a larger, 19-seat Embraer EMB-110 Bandeirante.

All of these brief, unsuccessful scheduled attempts, nullifying local residents’ ill-founded concern that Republic would ultimately develop into a major commercial airport and inflict its noise on close-proximity ears, failed to attract the needed traffic to render them self-supporting, emphasizing several airport-specific factors.

1). Republic was consistently associated with general, and not scheduled, operations during the latter part of its history.

2). Long Island MacArthur had already established itself as the island’s principle commercial facility, and carriers, as demonstrated by Precision/Northwest Airlink, gained no revenue advantage by diluting the same market, yet incurring increased airport and operational costs to do so.

“Republic Airport has had service by various commuter airlines and each has ceased service… ,” according to the 2000 Republic Airport Master Plan Update. “The commuter service market area is limited, geographically, taking into account the larger airports, such as La Guardia, Kennedy, and MacArthur and the service they offer.”

“Since 1969, Republic Airport has accommodated the region’s need for an airport devoted to private and business aircraft, as well as charter and commuter operations,” it also stated (Chapter 1, p. 1). “Because Republic is situated in the midst of residential, commercial, and industrial development, its role is inconsistent with that of a scheduled air carrier airport for commercial jet transport.”

With the number of annual passengers having consistently increased-from 13,748 in 1985 and 30,564 in 1990 to 33,854 in 1995-its future commuter role could not be entirely ruled out.

“While past efforts by commuter airlines have not been successful, the potential for future service exists and is to be considered in the planning for the airport,” it concluded (Chapter 2, p. 10).

10. The Future:

Unlike Roosevelt and Glenn Curtiss fields, which succumbed to modern-era pressures and swapped their runways for shopping malls, 526-acre Republic only surrendered a small portion of itself to the Airport Plaza Shopping Center. Instrumental in early-aviation development and in the Korean, Vietnam, Gulf, and Iraq wars, it transformed itself into a general aviation facility, peaking with 546-based aircraft and becoming the third-largest New York airport in terms of movements after JFK International and La Guardia.

Billing itself as “the corporate airbridge for Long Island’s 21st-century economy,” this westernmost Long Island general aviation facility accounts for 1,370 jobs and $139.6 million of economic activity, supporting 60 on-airport businesses. The 110,974 movements recorded in 2008 encompassed 52 by non-rigid airships, 7,120 by rotary wing, 76,236 by single-engine pistons, 6,310 by twin-engine pistons, 5,028 by turboprops, and 16,228 by pure-jets. The latter, its second-highest total, emphasizes its increasing role as the “Teterboro of Long Island,” perhaps pointing the way to its future. Indeed, companies considering the area for their corporate locations cite the airport as a major asset, since it provides close-proximity aerial access for personnel and materials.

Toward that end, the State of New York approved funding in April of 2009 for a Vision Planning process to collect data from residents, employees, businesses, and users, and then plot its future course. Specifically, the program had a three-fold purpose-namely, to define the airport’s role, to determine how it will fill that role, and, finally, to ascertain how it will work with the community to attain the desired operational and economic goals.

“As part of the National Plan of Integrated Airport Systems (NPIAS), Republic Airport is designated as a reliever airport with commercial service,” according to the 2000 Republic Airport Master Plan Update (Chapter 1, p. 1). “Under ownership by the New York State Department of Transportation, there are specific state development and policy procedures which are followed.”

Although it may never eclipse its current general aviation role, its importance was not to be underestimated.

“”Republic Airport is an important regional asset,” it stated (Chapter 1, p. 1). “It provides significant transportation and economic benefits to both Suffolk and Nassau counties. The policy of the New York State Department of Transportation and the Republic Airport Commission shall be that Republic Airport continue to better serve Long Island.”

Whatever the future holds for it, it has a nine-decade foundation upon which to base it, as acknowledged by the plaque hung in the passenger terminal by the Long Island-Republic Airport Historical Society, “honor(ing) the tens of thousands of men and women who labored here in East Farmingdale, contributing significantly to aviation technology and aircraft production.” Those men and woman turned the wheels of the 11 aviation companies based there.

Sources

Long Island Republic Airport Historical Society website.

Neubeck, Ken, and Douglas, Leroy E. Airplane Manufacturing in Farmingdale. Charleston, South Carolina: Arcadia Publishing, 2016.

2000 Republic Airport Master Plan Update, New York State Department of Transportation.

[ad_2]

Source by Robert Waldvogel

Sell Junkyard Auto Parts and Make Money From Home

[ad_1]

A lot of people make some serious money from home selling junkyard auto parts. My husband’s been doing this for a while now and just loves it! I’m still amazed at how untapped this market is. Maybe because when you sell junkyard auto parts you’re not sitting at a computer all the time?

But working from home doesn’t always mean making money online or just from your computer, especially if you’re doing any type of arbitrage deals.

And there are thousands of people looking for cheap auto parts online. Why not get in the game and be one of their salvage auto parts suppliers?

This is business that you really don’t have be a mechanic or detail specialist to make some real money, especially if you’re just dealing with interior or exterior restoration parts or basic engine parts.

For example, a head rest is a head rest. Unscrew some parts and pull it out. Door panels are door panels. Unbolt them from the hinges and take it off. Engine components may be a bit trickier but you can always go on YouTube and find out what the parts are, what they do and even how to remove them.

But even in this type of a business, you may want to specialize in a niche. What do I mean by a niche when it comes to used auto body parts? Pretty easy. Here are some ways to drill down a niche just by specializing…

  1. … in a particular make and model of vehicle
  2. … in sports cars
  3. … in truck parts
  4. … in engine parts
  5. … in exterior body parts
  6. … in interior restoration parts

Just think about all of the parts that go into building a vehicle, whether it’s a truck or car. Some parts are even interchangeable between makes and models. For example, I needed a new front fender for my 2001 Mercury Villager. Did you know that the 2001 Nissan Quest has an identical body to the same year Mercury Villager?

They do! So my husband took the parts off of a junked Quest and replaced the fender and front light assembly on my Villager.

The cup holder assembly in my Villager cracked too. But instead of replacing that unit, he found a narrow console with built-in cup holders from a Dodge SUV that fit perfectly between the front bucket seats of our Villager. Same color and texture as the interior of our car; that console looks like it came with our van!

So now we have three “new” cup holders in the front, and two additional cup holders for the rear seat, from one $10 used Dodge console.

You will have to do some research on eBay before going out and spending money. You can’t just go out and buy any junkyard auto parts and expect them to sell. There are some steps involved to making this a profitable at-home business.

  1. First, get a price list from your local salvage yard. Look for the least expensive parts on the list.
  2. Look up the parts on eBay and filter by Sold listings. Take an average of what those parts are selling for and see what your profit margin is. For example, if it’s going to cost you $10 to buy the part and it’s selling on average of $85 or more, and there are a lot of them being sold, you’ve got a winner.
  3. Take into consideration how much time and effort you want to put into pulling the parts off the vehicles. Some parts are pretty easy and you’ll only need a couple of screw drivers on hand. Other parts can be rather tricky, depending on whether you’re dealing with interior, exterior or under-the-hood parts.
  4. Another thing to think about is the weather! Here on the east coast it gets really blustery during the winter. And in the spring, it can get pretty muddy out in the yard. So you need to make sure you’re dressing for the weather – be prepared for anything.

[ad_2]

Source by Karen S Musselman

Tips for Selling Your Year-Old RV

[ad_1]

Buying an RV often involves painstaking research, and despite all those hard done investigations, you may want to sell it after a while. How to sell your RV without taking a hit due to steep depreciation in the second-hand RV market? The question is enough to give you sleepless nights, but you are not alone in this. Many want to sell their perfectly tuned year old RV for a variety of reasons.. People often lose interests in RV-ing and want to liquidate their hardly used rolling homes. Some want to sell their RVs to meet their needs for cash due to unforeseen circumstances. It’s also quite common for travel enthusiasts to buy a vehicle but with time and experience, they realize that they may need a coach of different size and specs. If you want to sell your RV for any of these reasons or the other, proceed with caution, as depreciation rate of second-hand RVs is quite high. You can expect to get 10 to 20 percent less of your buying price; you must aim to get the best deal possible. How to go about it? Here are a few tips:

Locate Your Ideal Buyers

The people who know you and trust your upkeep of the rig could be your ideal customers. Local RV-enthusiasts will also be interested in your unit, as it will be extremely convenient for them to make the transaction with a local seller.. You can meet many other prospective buyers, at local RV events. Often these events attract people who want to dabble into RV-ing and are trying to gain the inside knowledge. Your year-old vehicle may attract some first time RV-ers.

Approach a Dealer

If you fall into the group of RV-ers who want to upgrade and are on the lookout for buyers for their year-old vehicle, contact a renowned dealer in the vicinity. These dealers may assist you to get an excellent compensation for your young rig. And why would they want to help you? They expect you to purchase the upgraded model from their showrooms.

Assess the Value of Your RV

Dedicated sites which provide valuation quote for new and used cars offer insight of your vehicle’s resale value. Always check with them. Your zip code, year and make of the rig, and mileage will be some of the determining factors for your RV’s appraisal.

Dash for Some Quick Fixes

To command greater value for your RV, you must make sure that every part functions smoothly and that should include wheels, engines, GPS, batteries, cruise control, power mirrors, heating and AC units et al. Also, check if exterior paints, rubber seal of the skylight, the surface of the skylight, windows are intact. Service compartment should be in good condition, and it should look clean and smell nice. Interior walls, ceiling, floor, plumbing should also be in top order. The clean furnishings and serviced equipment will add to the value. How to sell your year-old RV in the right price bracket? The question might have given you many sleepless nights; but not anymore. Just follow the above blueprint and you will surely clinch the deal quickly.

[ad_2]

Source by John Bell Carey

Benefits of Recycling a Car

[ad_1]

When a car is wrecked or damaged, what do you do with it?

Your options are repairing it and reusing it. Many a time this is not possible. In such cases, you can sell your car to an auto-dismantler. An auto-dismantler recycles the car for repairing other cars, selling used parts, etc.

An auto-dismantler removes all the functional and non-functional parts from a car. It also removes various fluids. The metallic portion that remains is crushed into a small piece and shred into pieces.

Recycling of wrecked cars has become a lucrative business option because the number of users of recycled car parts has increased.

Reasons for users of recycled car parts increasing:

• They are nearly half the price when compared to new parts.

• Manufacturers of car parts make these parts so that they are durable. This ensures that these parts last even after the car reaches its end-of-life.

• Used car parts have a good fit as they have been detached from original vehicles.

• Used car parts market caters to a wide range of cars.

• For cars whose models have been discontinued, the only option to look for spare parts is used car market.

• Vintage cars can find their spares in the used car market.

Besides these benefits, an auto-dismantler benefits the environment also. Imagine if cars were not dismantled and reduced in size, how much of waste we would generate? Cars also contain various hazardous and non-hazardous fluids which can impact the environment adversely.

Let us see what service an auto-dismantler provides to the environment:

1. Recycling of parts:

Various parts are removed from the car. Those that are intact are sold ‘as is’ in the market. Those that can be repaired are restored and sold. Others that cannot be reused as functional parts are used in other applications. This reduces wastage and saves landfill. It also conserves our natural resources by reducing the need to manufacture new parts.

2. Recycling fluids:

A car contains many fluids such as coolant, brake fluid, transmission fluid, etc. Some of these fluids are recycled and can be reused. While some other fluids can be converted into fuels, etc. and reused. This is beneficial to the environment because some of these fluids contain harmful chemicals. If they are released into the earth, they can be detrimental to the health of animals, aquatic creatures, and humans. Some fluids are inflammable and so cannot be released into the environment.

3. Recycling Steel:

Steel is required for a variety of applications. But its manufacture uses up valuable natural resources. Therefore, recycling steel reduces the need to manufacture fresh steel positively impacting the environment.

Hence, we see that dismantling and recycling a car is beneficial in numerous ways.

[ad_2]

Source by Kanika Saxena

Importance of Car Covers

[ad_1]

Nowadays, cars are very important especially when carrying out daily activities. Some people buy for luxury. For whichever reason that you are buying it is important to protect it in order to maintain its value. Protecting your vehicle should not be seen as a waste of time. It is important to have a cover that will be adequate protection.

Car covers are important for protecting your vehicle. Due to the present nature of economy it is important to have a cover that is strong enough. Quality covers should be able to protect your vehicle for a very long duration.Many people value their car as a great asset thus they can go to greater length to make sure that their car looks presentable. It is important to keep your car in the best condition possible. Cars require to be properly maintained. You should have a good cover for your car type.

When you are not using your car it is important to protect it using car covers. They help in maintaining the aesthetic value of your car. They give protection to your car from external factors. If a person writes on your car using a sharp object, you will incur cost while trying to repair the damage done however you can reduce these maintenance costs by using covers. Some people will scratch or damage your car willingly or unwillingly; however, the cover will prevent such cases occurring. Some people view these covers as an expense but they provide more benefits. For those who know the benefits of covers, they never fail to use them.

When you park your car for a long duration, it is important to cover it. Even if you have parked your car in a private car park, it is important to cover it as other cars will produce smoke that contains harmful products. When you have not covered your car, it will become dirty due to the smoke.

During a bright sunny day, there are usually ultra violet rays which are produced by the sun. Ultra violet rays are harmful to the car as they cause the car’s paint to appear dull. This will make your shiny beautiful car not to be attractive; to prevent this, you should use a car cover. When it is hot, the car absorbs heat and when people get inside, they become uncomfortable due to the hot temperatures inside. When there are extreme high temperatures inside your car, they will cause damage to your car seats’ covers. All these disadvantages brought by high temperatures can be reduced by using the covers. The covers will help in keeping your car cool even when it is hot.

When your car is not in use, dust usually accumulate on it. Some dirt particles accumulate in the car’s internal parts thus increasing its maintenance costs. It is important to reduce these maintenance costs by proper use of car covers. It is important to know how to use the cover properly so that you can realize the mentioned benefits.

[ad_2]

Source by Greg Mitchell