Testing the All Natural Cedarshield Oil Wood Preservative
I had read the articles, the various reports and scientific data and so, it was now time to put this apparently miraculous product to the ultimate test. A good friend of mine who specializes in the hand crafted manufacture of Ash furniture gave me the suggestion that we could try it out on a freshly cut slice of Ash tree. Normally he fills the trees, removes the branches and they are then stacked for periods of up to twenty years to completely dry out the wood and make it suitable for use in the manufacturing process. What he now suggested was that we cut a large slice from a recently felled and still wet tree, then apply this cedar oil based product to it and see what happens and if there is any noticeable difference.
Armed with a five gallon bucket of the product, an extremely long chain saw, some gasoline and a couple of saw horses, we set off in my friend’s truck towards the site where his Ash trees were kept. After about forty minutes we drove up a bumpy gravel road and turned into an area that appeared to be an abandoned stone quarry. We stopped his truck and got out to view some well stacked piles of huge trees, all set out in neat rows to both sides of the truck. We commenced by emptying out the truck box of all the items we had carried with us. My friend set up the two saw horses in the middle of the gravel yard and then proceeded to gas up his chain saw and give it a first start. Now convinced that everything was in good working order, we headed off towards one of the log piles.
I was advised that this particular stack of trees had only been felled just over one week previously and as such, they were still as wet as the day they were cut down. My friend studied each of the trees in the stack and then made his decision as to which one would be our subject for the experiment. Marking the end of it with chalk, he picked up his chain saw and climbed up to a suitable position where he could access the tree’s diameter with ease. With ear muffs on and a couple of fast pulls on the chain saw string, that well known buzz burst into life and the long chain was ready to start cutting. He stood firm and straight on the logs and commenced his first cut through a tree with a diameter of almost five feet. Within a few minutes and a couple of position moves on his part, the end of the large tree fell free to the ground. The exposed cut was clean and straight and I could see most of the circles quite clearly. Without hesitation, he climbed back up to his original position and started his second cut. The chain entered the tree about three inches from the newly exposed end and once again he worked away steadily until an almost evenly thick slice again fell free to land on top of the first slice. With that, the chain saw stopped buzzing and he climbed down to explain that this was the slice we were going to do our experiment on.
Together, we carefully pulled the large tree slice away from the pile and then, with one of us one each side we lifted the rather heavy piece of wood up and over onto the two awaiting saw horses. Placing it carefully on top of the horses, we had to adjust one of them to get it lying more solidly in position without a wobble. After a short five minute rest, we took over the bucket of fluid to start our test. Armed with a three inch brush each, we coated all of the upper side with its first coat of the cedarshield oil. It soaked into the timber as quickly as we applied it and that in itself was quite amazing considering how wet the timber was. We waited another five minutes or so and then commenced applying our second coat in exactly the same way as the first and yet again, it continued to soak in to the wood almost immediately. After this we waited maybe ten minutes before starting our third and final application. This time, by the time we were about half way across the large circle of wood, the fluid started to drip from the underside and onto the gravel below. We completed our application, closed the bucket and placed our brushes tightly into a plastic bag then went back to examine the now actively dripping tree slice. Sure enough, the underside was oozing the fluid we had applied on the surface but it did feel different to the touch. At that point we really didn’t understand what was happening or why the fluid coming through the downward side felt so different to the touch.
The real surprise came when the fluid finally stopped dripping through the wood and we decided it was time to lift the slice back to the truck. Again, with one of us at each side we grabbed hold of the wood and commenced to lift it. We both stopped in unison and dropped the wood back onto the saw horses for we had discovered it was now very light in weight compared to the time we had placed it in position. After some discussion on this, we again lifted it up and carried it over to the waiting truck for transportation back to my friend’s workshop. With everything now packed up and well secured, we left the site and headed back home with our newly cut slice of Ash tree. Upon arrival at his home and workshop, we were both eager to investigate the treated timber in more detail. Yes, its weight was now equivalent to that of dried Ash of the same dimensions but we had to ask ourselves why? We sent the slice through his planer and thickness machine and out it came fully dressed just like a piece of fully seasoned dry timber I was advised. To my friend who was well used to working with this type of timber, this discovery was truly amazing in itself. However, when we read the technical data for the fluid and found that the wood was now dimensionally stable, that it would not split or warp and that it was also fully protected from all types of fungal attack, rot and insect attack, my friend looked at me and stated “This has to the most miraculous invention for the treatment of wood ever!”
Upon reading the technical data further, we discovered that the cedarshield fluid contained double tailed molecules within its formulation and upon its application to timber, these molecules would instantly attach themselves to hydroxyls within the timber, acting as a water scavenger and instantly turning the inherent moisture into ethanol gas which immediately evaporated and left the wood totally dry and completely preserved again almost everything. Truly an amazing achievement and even more so when we considered that this fluid is 100% natural organic in its make up and contained no toxins, poisons or hazards of any kind. My friend continued to work on our newly cut circle of Ash wood and now, I am the proud owner of a highly polished and most certainly all natural Ash picnic table that I seen being manufactured literally from start to finish. This unique fluid is now saving my friend from waiting for periods of up to twenty years before he can work his beloved Ash timbers. It is most certainly a wonderful, safe and highly effective product that is likely to be used throughout all areas of the lumber industry.
Source by Robert M Littlejohn