Category Archives:
Uncategorized

[ad_1]

When in a survival situation, it can be hard to know which way is up. Some skills that are frowned upon in conventional society actually come in handy in times likes this. For instance, have you ever heard of hotwiring a car? This is the process where someone starts a car but without a key. It’s something that is often seen in blockbuster movies and will be useful if you have misplaced your keys or if you must get out of town during an emergency or survival situation.

Interested in learning more? Keep reading for instruction on how to hotwire a car in an emergency so you can get moving once again.

What You Need

Before we begin, it’s important to note that, while hotwiring is an important skill to have in your bag of tricks, it’s also illegal and can land you in jail if used for nefarious purposes. We are not promoting any such activities here.

Also, the following methods are better suited for older model vehicles, especially the ones that don’t need microchip activation to start.

When you are learning how to hotwire a car in an emergency, it’s good to know about certain parts of the car as well as how they function i.e. what to touch and what to leave alone. In this way, when it’s necessary, you can start your car easily and safely.

But, that’s not all – you must also learn about the tools that you will need for the job. Thus, the second thing you must do is gather the materials that you will need – every car owner should have these on hand in case of emergency:

** Insulated gloves

** Driver’s License

** Proof of ownership

** Wire stripper

** Flat-bladed screwdriver

The Screwdriver

This method is much simpler and thus, should be tried first. But, you should also know that although it’s a relatively effective method used to disable the lock pins, it’s use will permanently damage the key mechanism. In other words, any screwdriver, key, or even flat piece of metal will be able to start the car from now on:

** Drill about 2/3 of an inch into the keyhole, where the inner flap starts.

** Remove the drill bit and let the lock bits fall into place

** Repeat as needed, until all the bits are in position

** Insert a flat head screwdriver into the keyhole and start the car normally.

If this method doesn’t work, don’t worry. You can use the screwdriver again for step two – as long as it didn’t get stuck in the ignition cover.

The Literal Hot Wire Method

Before we delve deeper into this particular step, it is important to note that you must use extreme caution when undertaking this task. Take your time so you will be sure to avoid painful electrical shocks and discomfort.

If you choose to use this method, you will have to rewire the car and bypass the ignition system, hence the name. The directions are as follows:

** The first thing you must do is to figure out if you can disable the steering wheel lock. Simply, remove the steering shaft from the back of the steering wheel. You will be looking for a little disk that looks like it can fit a key, remove it if possible.

** Use a screwdriver and remove the access cover that’s beneath the steering wheel.

** Next, look for two red wires, remove a ½ inch of insulation off of each end and twist the wires together, making sure that the exposed wires aren’t touching any metal. These wires must stay connected at all times.

** Find the brown wire and strip about ½ inch insulation of the end.

** Touch the end of the brown wire against the twisted ends of the red wires until the engine ignites.

Once you have the engine going, it is important to note that you must keep the red and brown wires separate, to avoid sparks which can drain the battery.

Important Considerations

To put it simply, the actual process of hotwiring a vehicle is easy. But, there are certain precautions that you should take before undertaking this task to ensure a successful result. For instance:

** Use caution when you are messing with the wiring and check with the Owner’s Manual for specific instruction about the wires and color coding for your specific model.

** Always wear insulated gloves when you are working on wires, as their exposed ends carry a powerful live current which can hurt you.

** After you get the car started initially, pull the wires apart and tape your ends to avoid getting electrocuted when you are driving.

** Modern cars feature microchip and transponder systems for getting the ignition unlocked, and if you try to hotwire them, it may set off an alarm.

The Conclusion

There’s nothing worse than being in a terrifying situation – where you have to move quickly – but you can’t find your car keys. Before panic sets in, take a step back and breathe. The above steps should provide you with all you need to hotwire your car in an emergency where staying put is just not an option.

[ad_2]

Source by Jeffrey Howie

[ad_1]

Auto accidents are an unfortunate part of life. Even though traveling by car is becoming safer and safer, the reality is that you or someone you love will likely be involved in a car accident at some point in time.

Half of the battle of surviving a car accident is the safety precautions resident in the car itself. Things like seat belts, airbags, and crash zones can directly improve your chances of surviving a car accident during the event itself, but what happens after the wreck? When emergency personnel arrive on the scene, what can they do to extract you from the totaled vehicle?

Perhaps one of the most common, but widely misunderstood auto accident survival devices are hydraulic rescue tools, frequently referred to by their trademarked name “Jaws of Life.” This innovative set of tools has a number of unique advantages over older, less effective and even dangerous tools like saws, axes and crowbars.

Saws are useful in some applications, but can cause sparks when cutting through metal, which can be dangerous at car accident scenes due to the presence of flammable liquids and vapors. They also tend to be rather loud, which can further antagonize a victim that has already been traumatized by a car accident, and not every saw can cut through the strong materials used by auto manufacturers in most modern cars.

Axes and crowbars are also moderately effective, due to the fact they are limited by the strength of the user and the structural integrity of the car. In some cases of severe car accidents the motion of an axe or crowbar used to pry open a stuck door or collapsed roof can actually cause the bulk of the car to shift, endangering victim and rescuers alike.

Hydraulic rescue tools circumvent those dangers and provide a number of other important safety features. Their strong jaws can cut through most materials without causing sparks, and as the jaws clap shut they can hold the cut material together, unlike a saw which merely separates the two pieces.

Furthermore, the same action that cuts a piece of metal can also be used to separate crushed materials. The hydraulic jaws simply act in reverse and spread apart, and this action can be strong enough to lift a damaged car off the ground and delicate enough not to disturb and risk further injury to a person that has suffered a spinal injury or traumatic head wound.

The “Jaws of Life” were so named because of a number of reasons. One of the inventors was named Jack Allen Watson, and he signed his initials onto design documents, which gave the device its first name. The device often also has two toothed mandibles that in fact strongly resemble a set of jaws from some monstrous animal.

Perhaps the best, and most lasting reason the Jaws of Life got their name is due to their basic function. Car accidents often involve situations where the right tool for the right job could mean the difference between life and death. Hydraulic rescue tools like the Jaws of Live could very well snatch people back from the jaws of death, and that notion helped cement this important tool with an iconic and brand trademarked name that thousands of people depend on each year.

There is no doubt that if you are involved in a car accident, you have a number of things on your mind. Should this traumatic situation happen to you, keep in mind that help is on the way, and that there will be Jaws of Life to help save yours.

[ad_2]

Source by Bryan Snyder

[ad_1]

Since the beginning of men’s fashion, chain wallets have made its way into the lives of men. The idea of wallet chains originated from bikers even before they became popular with punk rockers in the 1970’s. The use of chains became ideal when bikers wanted a way to keep their wallets from falling out of their pockets while they are cruising or racing on their motorcycles. Just like any other product available to the people in the U.S, a wallet that consists of a security chain is a necessity.

Leather biker chain wallets became popular amongst punk rockers and grunge enthusiasts during the 1970’s and 1980’s. The most featured type was the black leather with a heavy gauge chain. Heavy metal enthusiasts found that the tough look of such wallets played an essential role in their appearance. Biker wallets are not only for appearances sake, but the usefulness of a chain wallet is the one major contributor its popularity and success.

The latest development is the trucker wallet which consists of a wallet chain for security. It is a great twist to an existing product, these trucker wallets are created with more pockets to easily store receipts and other paper slips that a trucker may need to keep throughout the day. By owning a chain wallet, truckers no longer have to fret about losing their wallet during their everyday workload and they do not have to think about easily being a victim to preying pick pockets during the night. Truckers do not have to run back and forth to their truck for a forgotten piece of paper or card because there is enough storage available to carry and organize all their essentials. Because of the design of increased storage, these wallets are much larger in size compared to ordinary wallets. If you are not comfortable with larger sized wallets, this may not be the style for you. You would probably be better of purchasing a traditional or smaller sized version that may or may not consist of a chain.

[ad_2]

Source by Dessie Campbell

[ad_1]

On an average an Indian living in a city moves once in three years, whether for work, education, or health-care. This simply calls the hassles of relocation. Apart from the difficulties faced while making arrangements for your journey and resettling in the new place, a relocation also means either dumping the furniture or selling it at very low-cost. Furniture, in the first place is quite expensive. In fact, furniture is the third most costly purchase that one makes. The first two being a house and a car. To call a flat – a home, it requires furniture, otherwise it will be just an empty space, and people willingly spend a lot on buying furniture. The furniture, in certain ways, mirrors the owner. It shows the owner’s taste of living. No wonder, why furniture is often associated with the owner’s class.

As wanting the best is the human behavior, one also looks for the best when it comes to picking furniture. However, to tell the truth, not everyone can have the furniture that they desire for a number of factors. The high cost plays a major factor here, plus, there is the problem of frequent relocation. Today someone who is 25-30 years old is still not sure of the city they want to get settled in. Still, they want everything even if it is out of their budget. Besides, buying a costly furniture is only ideal if you are going to stay in one place for at least four years. If you are relocating within 3 years, you have to sell the costly furniture at a rate which is less than half of the original cost. And in most of the cases, you have to just dump them.

So instead of buying the furniture, it is smart to rent them. Renting is not a new term, and has always been there. However, for the most part, it is fragmented and disorganized, constrained to certain limits. Online renting, on the other hand, is well-organized, easy and convenient, and it is growing at a very fast pace. In just a period of last three years around 100 online rental companies have come up, many of which were established in 2015.

Furniture industry is growing fast in India, and is expected to grow more than $32 billion by 2019, making it one of the fastest growing industries. The online furniture rental in India is still a new concept. It is most handy for those who are hopping places in a short time period and can’t afford to buy high-priced furniture. Expats, students, and young professionals are going to benefit the most. For a small monthly rental they can get access to a wide range of luxurious furniture. There are even online rental services that provide furniture rentals for office use.

Traditionally, Indians want to own things, but the time is changing and so is one’s attitude towards rental furniture. The good thing is that the furniture industry is growing, and renting furniture is quickly picking trend amongst the people. Most of the people who rent furniture are in the age window of 22 to 35 years and have a decent income. They are basically the young professionals looking for a fancy lifestyle and don’t believe in hoarding.

If one puts all the parameters together, online furniture rental makes complete sense where one can use the furniture as per the convenience and pay as per the budget, without having the need of owning the furniture. The user base is huge, and entrepreneurs and investors should keep a check on online furniture rental industry as it is certain to grow.

[ad_2]

Source by Sudeep Thapa

[ad_1]

Changing the oil in your Classic Mini is easy to do, yet you’d be amazed how many people pay garages to do this.

To carry out the oil change yourself you will need the following:

• A 5 litre container of new oil
• A new oil filter
• A large spanner
• A screwdriver set
• An oil filter removal tool or large flat-headed screwdriver
• A funnel
• A clean rag
• An oil tray

First, run your Mini engine for five minutes in order to heat up the oil in the engine. Then park the Mini on a level surface and turn off the engine and open up the bonnet.

Using the large spanner, unscrew the sump plug on the side of the sump beneath the car. Make sure you place an oil tray underneath the car to catch the oil.

When the oil is flowing out of the sump, unscrew the oil filler cap on top of the engine to allow the oil to flow faster.

A Mini engine and gearbox will hold over 4 litres of oil. If the container you are using to catch the oil cannot hold this amount, replace the sump plug to stop the flow of oil while you empty the container. I find it useful to keep an old oil container in which to empty the used oil. Use a funnel to prevent spillage.

While the oil is draining out of the engine, remove the front grill using your screwdriver set to gain access to the oil filter.

Eventually the oil will trickle to a few drips a minute. What I like to do next is to pour in some new oil into the top of the engine using a funnel, and let that drain through. It will come out black at first as it collects gunk along the way. When it starts coming out looking like it went in, clean the drain plug of all oil and metal filings with a clean rag. Use the rag to clean the grooves of the sump hole as well so that it is free of metal filings. You can also pour some new oil onto a clean rag and smooth it into the sump hole and over the sump plug.

Next screw the sump plug back in until tight, but don’t go mad and try to over tighten it. It’s tight enough if no oil drips out when you fill it back up.

Mini oil filters can be hard to remove, which is why you can buy oil filter removal tools. Use the oil filter removal tool to remove the old oil filter. With the old Mini oil filter removed, dab some new oil onto a clean rag and clean the oil filter seal on both the engine and the new oil filter.

Screw the new Mini oil filter onto the engine making sure that your hands and the filter casing are not covered in oil, which can cause slippage and prevent a tight seal. Replace the front grill.

With the sump plug back in place and the new oil filter fitted, start pouring new oil into the top of the engine through the filler hole using the funnel, and let it settle. Keep topping up the oil until the dipstick level reads close to max.

Replace the oil filler cap and close the bonnet. Take the car for a short drive around the block and then park it up and allow the engine to cool down.

Once the engine is cold you will find that the oil level has dropped. Remove the filler cap and top up the oil until the oil level reaches max.

You should find that your Classic Mini runs a lot better after an oil change. I could not believe the difference an oil change made to my Mini in both terms of performance and how smooth the engine ran.

It is worth giving your Mini a regular oil change. Check your oil level periodically, and if the oil on your dipstick starts looking a little black, it’s time for another change.

[ad_2]

Source by David Flint

[ad_1]

Most of the times, the attainment of best embroidery digitizing becomes a great dilemma for a number of different persons associated with this astonishing field of modern designing now a day. In this regard, the best way to get acquainted with highly incredible and worthwhile digitized facilities, a vendor should always contact a best digitizing source in order to achieve highly beneficial and best-quality designing results according to his/ her individualized needs and desires at the same time. Similarly, all such individuals can also get exceedingly benefitted in achieving their desired digitized outcomes, if they try to learn few solid digitization techniques in case of performing any self-digitizing movements.

Editing of the digitized designs at the digitizer’s end

However, a digitizing expert can easily modify, edit or combine different design details of certain graphic files according to his/her requisites related to different designing patterns. And this whole processing is mainly done in the special software programs selected by the related folks themselves. Various actions like rotating, scaling, distorting, splitting, duplicating, cropping etc. can be performed by the operators in such special software. At the same time, the designers get the amazing opportunity of colour changing like making it monochromatic in few cases. This feature can also be proven to be beneficial in terms of restoration of such colour changings in the similar software programs. In the exclusive phenomenon of embroidery punching, the designers can also add few excessive details like texting and shapes according to the diverse needs of varying vendors. However, few of the minute design details are also usually skipped by the digitizers that are of no use by the vendor in his final products while getting embroidered.

Editing of the digitized designs at the vendor’s end

By the advancement in this exclusive phenomenon of computerized embroidery, the vendors can also edit few simple details like editing, removing or adding instead of resending the files to the digitizing artists for the sake of availing redo facilities. Also, in the final processing of embroidering a particular digitized design on a specific product collection, the associated personnel can even edit few design details with the help of some inbuilt features of the embroidery machines themselves. While the loading of a design in an embroidery machine, different tools like cables, floppy disks, CDs, special cards or USB interfaces are mainly used to transfer the digital embroidery design data in it.

An embroidery machine and compatible file types

In accordance to this, the file types like ART Bernina Artista, ASD Melco, OESD, DST Tajima, EMD Elna Expressive, CND Melco condensed, CSD POEM, Singer EU, Viking Huskygram, EXP Bernina, Melco, OEF OESD Condensed, GNC Great Notions Condensed, JEF/.JEF+ Janome, New Home, EMB, HUS Viking Husqvarna, STX Toyota/Data Stitch, STI Toyota/Data Stitch, PCD,PCS,.PCQ Pfaff, SHV Viking Husqvarna, PHB, PHC Baby Lock, Bernina Deco, Brother, PEC, PEL,.PEM,.PES Baby Lock, Bernina Deco, Brother, Simplicity, SEW Elna, Janome, New Home, Kenmore, XXX Singer, Compucon, VIP VIP Customizing, VP3 Pfaff etc. are chiefly being used at a global level in machine embroidery depending upon the compatibility of a particular machine.

Stabilising the fabric before embroidering

However, before the initializing of a particular embroidery pattern, the stabilising of a particular fabric is a must for the sake of availing wrinkle free and smooth designing outcomes on your preferred products. For that matter, the type of embroidery machine, apparels, and design density are the key factors to focus on in order to stabilise your required designing items. In this way, it is also significant to know that the stabilisation is a prime need in the embroidering of knitted fabrics and large designs to be created on a number of different apparel types.

[ad_2]

Source by Laurie Lee

[ad_1]

A Personal watercraft for sale is a great thing to buy especially if you are the kind of person that loves adventure or if you run a business where you provide them for rent. However, we all know that they are pretty expensive. For an individual adventure enthusiast shelling up these huge sums of money can sometimes be difficult. Therefore buying this great machine has remained a dream for many of its enthusiasts.

However this need not be the case at all. Advances in information technology are making it easier to locate and buy used Personal watercraft for sale. These have very many advantages over buying new especially the price. This article explains exactly how you can get a steal by buying used Personal watercraft for sale.

Personal watercrafts are subject to uneven depreciation. This is the case with most machines on sale. The depreciation in the first year is close to 30%-35%, second year is another 15%-20% and then it follows at 10% each year. Now you can clearly see that if you were to buy a watercraft which was less than 2 years old, you are getting it at half the price. Not many people use their watercrafts each day, so it is sparingly used and it hardly makes a difference in terms of use. Earlier the problem was locating someone who was willing to sell them. But now, all you need to do is click a few buttons and type a few keystrokes to get connected to an interested seller and get the deal closed in a few hours.

Buying a Personal watercraft for sale is not all. Ask any experienced buyer and they will tell you that there is a whole list of safety gear that you have to buy along with it. This can be quite a burden on your wallet. But when you buy them used, the seller most likely will have no utility for the gear as well. Also if the seller were to sell the gear separately, they would hardly get anything. Hence most used watercrafts come as a combo deal and the safety gear is available to the buyer at dirt cheap prices. This is a substantial portion of the savings.

Also financing a Personal watercraft for sale is very easy nowadays. There are many marine lenders available. At the same time, there are not many buyers so the competition gets intense and buyers get a good deal on the loan. So much so that most websites which make buyers and sellers meet actually have tie ups with lenders to offer the best rate to their customers. Since the lender gets majority of their customers from these places, they have no qualms doing it.

So if you compare the total cost of ownership of new and used Personal watercraft for sale, you will inevitably favor the latter if you have perfect information about the product and the seller. That is what the intermediaries are there for!

[ad_2]

Source by Rechal Smith

[ad_1]

Purchasing new tires for your vehicle is something that cannot be avoided simply because having the proper tires is crucial to your safety. Often times one considers the option of going the cheaper route in order to save money, but that may not be the best way to go. There are pros and cons to buying cheap tires, and before you make your final decision you’ll want to familiarize yourself with some of the following pieces of information.

Cheaper Is Not Always Better

Sometimes when you skim on price, you also skim on quality, which means that you will not always be getting the best quality tire for the cost that you are incurring. You may find that the tires end up wearing out faster and you have to purchase new ones more frequently than you would if you would have purchased a higher quality, more expensive tire in the first place.

You will want to inspect the tire quality before you make a final decision on whether or not you will go with the lower priced tread. These tires are often times susceptible to more rapid tread wear and generally will not last as long, so it may be in your best interest to avoid paying too little for them in order to get better quality.

Not Always The Safest Bet

Tires are an important item when it comes to safety because they provide traction while traveling. Essentially, they are the only thing between you and the road. If you purchase low cost tires, you may be putting yourself in jeopardy because they may not provide the best traction when it comes to hazardous road conditions. So you have to consider whether or not you are willing to sacrifice safety for cost savings.

Saving Money Is Great

There is no better feeling than the one you get when you buy something at a bargain price. The same is true when you are able to buy new tires for your automobile at a super low price.

One of the benefits of buying cheap tires is that you are able to save yourself a pretty good chunk of change, which can be especially important if you are on a tight budget. When funding is limited, you don’t want to have to spend a large sum of money to put new tread on your ride, which is one thing that can be avoided by going the cheapest route.

More Money For Other Needs

When you save money on tires, you then have funds to put toward other things that you might need for your vehicle. Perhaps you need to get a new muffler, or you need a new paint job. When you save money by the cheapest tires, you are able to use the money that you saved for other more important expenses or more desirable expenses.

[ad_2]

Source by Dennis Montgomery

[ad_1]

A device that is used to lift objects is identified as a jack. These devices are used to lift heavy objects and are used for all types of purposes. They can be used in garages to facilitate raising the level of the vehicle so that the mechanic can get underneath and repair it. They come in various sizes and are capable of lifting different weights depending on the size of the device. They can lift anything from a small car to a big truck. It is understood that due to their weight these objects cannot be raised up just with manual effort. Hydraulic jacks are tools that are specifically designed for this purpose; they are a portable device that is very easy to use.

Hydraulic jacks work very efficiently and are available in different types. Everybody nowadays keeps a jack in the boot of their vehicle in case of an emergency. You never know when you might have an accident or any unfortunate incident that may interrupt your journey? If you are equipped with the required tools then you don’t have to worry even if there is no garage nearby.

Most of us have had to change a tyre at some stage or maybe you have needed to get underneath the car to see if there is a problem with it. The most important thing to remember is that you must ensure that you are using hydraulic jacks properly; you can refer to the user manual that is given to you with the vehicle when you purchased it.

Some damages to your car may pertain to the underneath parts of the car. So, it is obvious that you cannot repair it until and unless, it is visible. This is the time that hydraulic jacks justify their role in society. These tools are simply placed underneath the car and using the lever on it, the car is raised to a certain height. This will enable you to see whether there is any issue with the base of the car, and whether you can repair it.

It is a fact that not everybody may be aware of its functioning but it is necessary to learn how to utilise your hydraulic jack. It will be advised that the users gain all the information regarding these tools so that they don’t have to panic in the case of an emergency. They will be able to fix the issues with the car and continue on their journey. The toolbox of the vehicle must essentially have one of these hydraulic jacks. You will always be ready with the solution if you possess these tools.

[ad_2]

Source by Aya Wilkinson

[ad_1]

So you’re looking for some new car parts to compliment your cars appearance and attitude on the road. Great! You’re just like most people driving down the highway. In fact, most people take pride in their vehicles appearance and performance, and spend lots of money on extensive modifications. However, this can get costly.

Sadly, not everyone can feed their need for speed with their current salary. Thankfully, there are a few services out there that allow you to pay for your purchases over time. This can be convenient for emergency repairs such as blown head gaskets, transmission failure, or other catastrophic failure that requires a fast repair, allowing you to get back on the road. These services can also be used to purchase parts that aren’t necessarily an emergency, but still desired by the owner.

I’ve found a few car part financing options, and I’ll provide some information about them in hopes of informing you to make the right decision if you see yourself in a situation requiring you to finance car parts.

PayPal Credit – PayPal credit, formerly known as BillMeLater has been around since 2000. Users sign up for free, submit information for a credit check, and can begin making purchases if approved for an account. Payment terms are typically set in increments over six months or until the total cost is paid off. If the total is not fully paid off after the six month period, an interest rate of 19.99% is applied in the form of a late fee. If considering using PayPal Credit, keep in mind the payment terms and be wary of the high interest rate. PayPal Credit is a good option for financing car parts since it is used by many e-commerce sites who typically have lower prices than many brick and mortar establishments.

CarCareONE – CarCareONE is a car part finance service which works very similar to a credit card. Run by Synchrony Financial which has been around since the 1930’s, CarCarONE allows to you make monthly payments on routine maintenance, trips to the gas station, and emergency repairs with moderately low interest. Furthermore, no interest is applied to your purchases if they’re paid off within 6 months. To sign up, you must apply and consent to a background and credit check before making purchases. CarCareOne is great for emergency purchases as it is accepted at more than 16,000 establishments nationwide, but keep in mind the high interest rates if not paid off with the first 6 months.

Affirm – Affirm is a relatively new way to finance car parts, but offers the most leniency on credit. Just like PayPal Credit, Affirm offers a line of credit for users to spend on purchases. However, this line of credit is not fixed, rather underwritten depending on the amount and the merchant purchased from. Affirm applies small finance charges with each payment, so you risk paying more over time if you decide to split your purchase into multiple payments, but the rates are generally small. Affirm is a great option for users who want to purchase parts but would prefer paying for the item over time without risking long term high interest rates seen with PayPal Credit and CarCareOne. Remember, Affirm doesn’t affect your credit line, so this method may be the better option if your credit is low.

Hopefully this article has cleared up some questions you may have regarding how to finance car parts. While it may not always be the best option for long term, it is a great choice for emergencies!

[ad_2]

Source by Alex Kollos