Menu

Daily Archives2017 July 08

Home

Auto Recycler for Your Damaged Car

[ad_1]

Motor vehicles are the most recycled products because of the availability of auto recyclers. Auto recycling entails stripping a vehicle off its reusable parts and then crushing the remaining body. The reusable parts are sold and the crushed portion is recycled by a scrap processor.

Why recycle?

This is done to reduce wastage. Numerous cars are written off as scrap every year. It makes sense to remove the parts that can be used and reuse them. This is not only beneficial for the environment but also makes auto parts available at affordable prices to consumers. In fact, the car manufacturers bear recycling in mind while manufacturing cars. Hence, they provide parts that are long-lasting.

As is apparent, an auto recycler works on the principle of conserving the environment. The three Rs of environment conservation are Reduce, Reuse and Recycle.

Reduce:

This implies using fewer natural resources for conserving the environment. If auto parts are reused, then a lesser quantity needs to be manufactured. If manufacturing reduces then the natural resources used are reduced.

Reuse:

Reusing has a positive impact on the environment. Hence, auto parts that are removed and sold enable reducing the landfill.

Recycle:

Recycling auto parts is the basic function of a recycler. Recycling helps conserve the environment as it reduces landfill and depletion of the environment for creating new parts.

Benefits of auto recyclers:

Good for the earth:

• Recycling is beneficial for the earth because of the following reasons:

• Reduces dangerous toxins from being released into our ground and water.

• It prevents the use of valuable landfill.

• It helps preserve the natural resources as it reduces the need for manufacturing new parts.

Good for your wallet

Recycled parts are available at nearly half the price as the original. Hence you save a good amount by purchasing them.

Good for your vehicle

The recycled parts are original and genuine made as per the original manufacturer’s specifications. In fact, many sellers of recycled parts even provide a warranty for them.

Hence, we see that auto recyclers, recycle End-of-life vehicles and protect water, air, and soil from harmful material contained in them.

So, if you have an end of life car, why sit around with it? Anyway, damaged cars do not have a book value so establishing a price for it will be difficult. Sell it to an auto recycler and earn cash in exchange! You will be doing your bit for the environment as well!

[ad_2]

Source by Kanika Saxena

Everything You Wanted to Know About Automotive Fuses

[ad_1]

A fuse is really a kind of over current protection device. Made up of a metal wire or strip, it can melt when too much current flows, to interrupt the circuit to which it is connected. In the case of overload the device fails to prevent excessive current so that further damage can be prevented. Fuses limit threat to human life and property damage.

Wiring regulations lay down specifications for maximum current rating for circuits. Automotive fuses are used to protect the wiring and electrical equipment for vehicles. They get rated for circuits that may not be higher than 24 volts direct current but others may be of types rated for 42-volt electrical systems.

Blade fuses have a plastic body with two prongs that fit into sockets that are commonly used in vehicles. Every one of them is printed with a numerical ampere rating. They come in four different physical dimensions, these being low-profile mini (APS), mini (APM / ATM), regular (APR / ATC / ATO) and maxi (APX) heavy-duty.

The APS fuse is also called micro since the term means smaller than mini. Regular blade types are better known as standard fuses and they were developed in 1976 for low-voltages use in motor vehicles. Mini fuses were introduced in the 1990s. Blade type fuses get mounted on blocks, in-line holders or even clips.

Well known manufacturers of automotive fuses include Bosch making torpedo or ATS types. Used mostly in old automobiles, their physical dimension is 6×25 mm with conical ends. Bosch types use same color coding for the rated current and DIN standard is 72581/1 with size of the fuse at 6×25 mm.

Lucas type fuses are also used in old or assembled automobiles and their length is either 1 inch or 1.25 inch with conical ends. They use same color coding for the rated current. Lucas types have three ratings – continuous current they are designed to carry, instantaneous current at which they will go off and continuous current at which they will also melt.

Modern vehicles having electrical systems protected by glass cartridges are rated 32 volts with current ratings from 4 amperes to 30 amperes. Their dimensions and characteristics are standard J554. All of them are 1/4 inch diameter and length varies according to their ratings. A 4 Amp is 5/8 inch, 20 Amp is 1 1/4 inches and 30 amp is 1 7/16 inches.

The Limiter fuse with metal strips on a lock plate is for currents over 40 amperes. Used in close proximity to starter battery boxes, they are used in electric vehicles like forklift trucks. While blown fuses in cars would not signal a major problem in most cases, but if they are blowing a lot it could be an indication of a problem with the electrical system. This does signify you need to check out vehicle maintenance.

[ad_2]

Source by Santosh SP Chhalotre

Installing E Track in a Wood-Paneled Trailer

[ad_1]

E track is an effective way to secure cargo in an enclosed trailer. Here’s how you can easily install it in a wood-paneled trailer. This example uses a horizontal 1/8″ thick track with 1/4″ diameter mounting holes.

The first step is to look for wall studs inside the trailer. A standard way to spot them is by checking for the screws that hold the paneling in place. The screws will be attached to the wall studs.

Most wall studs in trailers are about two inches wide. Knowing that should help you find the center of the stud, and each stud is generally spaced about two feet apart. When you install the track, make sure it’s sitting as flat as possible on the wood and that it’s evenly spaced over the studs.

To secure the track to the wall while you’re working, mark off a couple of holes and start by putting in a couple of temporary screws.

Number 12 screws are your best bet for the permanent connection. Just make sure the holes line up with the wall supports before you continue. It shouldn’t be too difficult. In a standard trailer configuration, if one hole lines up, the rest will as well.

Keep in mind that the outside wall is only a couple of inches away, so you’ll want to mark your drill bit so you don’t go in too far.

Once the e track is attached to the wall, hook up a tie-down strap and give it a good pull to make sure it’s secure before you attempt to secure your cargo.

Many people ask about the best height and location for e track. The answer is that it depends on what you want to secure. For a refrigerator, mid-height would be about right. For a motorcycle, you might want to install the track on the floor and secure the straps to each handlebar. So the location really depends on the job at hand.

[ad_2]

Source by Scott Brunson